Research Publications

  1. Saeed Ahmad

Published in International Journal

  • Shamas Tabraiz, Ahmad, S., Iffat Shahzadi, Muhammad Bilal Asif., “ Study of physio- Psychological Effects on Traffic Wardens due to Traffic Noise Pollution; Accepted in Journal of Environmental Health Science and Engineering.
  • Ahmad, S., Elahi, A., Mehwish Asad., Hira Zahid., “Investigation of Blast Loading Effects on Infill Brick Masonry Walls,” Accepted for Publishing, Hindawi Publishing Coorporation.
  • Ahmad, S., Elahi, A.,  Pervaiz, H.,  Ghaffar, A., “Experimental Study of Masonry Wall Exposed to Blast Loading“, Materiales De Construcción, Vol. 64, No 313, pp.  2014.
  • Ahmad, S., Elahi, A., Kundi, S., “Investigation of Shear Behavior Corbel Beams strengthened with CFRP“, Life Science Journal, Vol. 10, No. 11s, pp.  2013.
  • Ahmad, S., Elahi, A., Junaid Hafeez, J., Fawad, M., Ahsan, Z., “Evaluation of the Shear Strength of Dapped Ended Beam“, Life Science Journal, Vol 10, No. 3,  pp 1038‐1044, 2013.
  • Bukhari, I. A., Vollum, R., Ahmad, S., Sagaseta, J., “Shear strengthening of short span reinforced concrete beams with CFRP sheets“, Arabian Journal for Science and Engineering,  Vol. 38, No. 3, pp. 523‐536, 2013.
  • Ahmad, S., Elahi, A., Iqbal, J., Kiyani, M.A., Ghaffar, A., “Impulsive loading on reinforced concrete wall“, Proceedings of the Institution of Civil Engineers‐Structures and Buildings, Volume 166, No. 5, 2013.
  • Ahmad, S., Elahi, A.,  Barbhuiya, S. A., Ghaffar, A., “Shear strengthening of reinforced concrete continuous beams“, Proceedings of the Institution of Civil Engineers‐Structures and Buildings, Volume 166, Issue 5, ISSN: 0965‐0911, March, 2013.
  • Ahmad, S., Elahi, Barbhuiya, A. S., Farooqi, Y., “Repair of cracks in simply supported beams using epoxy injection techniques“,Materials and Structures, Volume 46, Isue:9, pp:1547‐1559, ISSN: 1359‐5997, 2013.
  • Ahmad, S., Elahi, A.,  Barphuiya, S.A., Farid, Y.,”Use of polymer modified mortar in controlling cracks in reinforced concrete beams“,Construction and building materials, Volume: 27, Issue:1, pp:91‐96, February 2012.
  • Ahmad, S., Shah, A., Zaman, N., “Design and evaluation of the shear streams by strut and tie model (STM) “,Iranian Journal of Science and Technology, Transaction B Engineering Vol. 35, Issue : C1, pp: 1‐13, 2011.
  • Ahmad, S., Barbhuiya, S. A., Elahi, A., Iqbal, J., “Effect of Pakistani bentonite on properties of mortar and concrete“,Clay Minerals, Volume: 46, Issue: C1, pp: 85‐92, 2011.
  • Shah, A., Ahmad, S., Salimllah, K., “Investigation into shear medium strength reinforced concrete beams“, Structural Engineering and Mechanics Journal, Vol: 35 No.3, 2010.
  • Bukhari, I. A., Vollum, R.L., Ahmad, S., Sagaseta J., “Shear strengthening of reinforced concrete beams with CFRP“, Magazine of Concrete Research Thomas Telford, UK, Vol: 62, No.1, Page: 65‐77, Jan 2010.
  • Ahmad, S., Shah, A.,  Nawaz, A., Salimullah, K., “Shear strengthening of corbels with carbon fiber reinforced polymers (CFRP) “,MATERIALES DE CONSTRUCCIÓN MADRID ESPANA, Vol: 60,299, Page: 79‐97, Jul‐Sep, 2010.
  • Ahmad, S., Shah, A., “Evaluation of shear strength of high strength concrete corbels using strut and tie model (STM) “,Arabian Journal For Science and Engineering, Vol: 34 No. 2B, Apr, 2009.
  • Ahmad, S., Shah, A., Zaman S., “Evaluation of shear strength of four pile cap using strut and tie model (STM) “,Journal of the Chinese Institute of Engineers, Vol: 32 No. 2, Page:243‐249, Mar, 2009.
  • Bukhari, I. A., Ahmad, S., “Evaluation of shear strength of high strength concrete beams without stirrups“, Arabian Journal for Science and Engineering, Vol: 33 No. 2B, Page:321‐336, Oct, 2008.
  • Siddique, J. I., Ahmad, S., “Impulsive loading on concrete structure“, Journal of Structure and Building Institution of Civil Engineering UK, pp: 231‐241, Aug, 2007

Published In National Journals  

  • Ahmad, S., Shah, A., “Experimental verification of current shear design high strength reinforced concrete beams“, Mehran University Research Journal of Engineering &Technology, Vol: 31, No.3, July, 2012.
  • Ahmad, S.,  Gulzar, A., Pervaiz, H., “Influence of diaphragm action upon the seismic response of high moment resisting building frames, Technical Journal UET Taxila, 2011.
  • Qureshi, L. A., Ahmad, S., “Optimization of fineness of ordinary portland cement manufactured in Pakistan“,Mehran University Research Journal of Engineering, 13 Aug, 2009.
  • Shah, A., Ahmad, S., “Effect of longitudinal steel, shear span to depth ratio on the shear design of high strength concrete beams“, Mehran University Journal of Engineering & Technology, 30 Jun, 2008.
  • Ahmad, S., Bukhari, I. A., “Effectiveness of shear span, concrete strength and stirrup spacing on behavior of pre‐ stressed concrete beams“, Mehran Journal of Science and Engineering, 14 Mar, 2007.
  • Ahmad, S., Yaqub, M., “Influence of shear to effective depth ratio on shear capacity of high strength of high strength beam”, Technical Journal UET Taxila, pp: 1‐10, 2003.
  • Ahmad, S., “Flexure behavior of under‐reinforced and over‐reinforced high‐strength concrete beams”, Technical Journal UET Taxila, pp: 20‐29, 2002.
  • Ahmad, S., “Shear strength of reinforced high‐strength concrete beams without web‐reinforcement”, Technical Journal UET Taxila, Page : 3‐14, Technical Journal UET Taxila, pp : 3‐14, 2002
  • Ahmad, S., “Design of medium strength concrete mixes using local materials adopting internationally accepted mix design methods”, Research Journal UET Lahore, pp: 100‐129, Jan‐Jun, 2001.
  • Ahmad, S., “Calibration of the cube testing machine”, Research Journal UET Lahore, pp: 145‐161, Jan‐Jun, 2001.
  • Ahmad, S., “Shear strength of reinforced concrete beams without web reinforcement”, Technical Journal UET Taxila, pp: 21‐30, 2001.
  • Ahmad, S., “Investigation of various factors affecting core compressive strength of concrete”, Technical Journal UET Taxila, pp : 9‐20, 2001.
  • Ahmad, S., “Effect of moisture variation on C.B.R. of soil”, Research Journal UET Lahore, pp: 7‐15, Jul to Dec, 1991
  • Ahmad, S., “Workability measurement methods”, Research Journal UET Lahore, pp: 36‐44, Jan to Jun, 1991

  

  • Ahmad, S., “Moisture content of aggregates its measurement and effects on concrete properties”, The Pakistan Engineers, pp: 17‐32, Oct, 1984, Mar, 1985.
  • Ahmad, S., “Variability of factors affecting workability and other effects on water content of concrete”, Research Journal UET Lahore, pp: 38‐50, Jul to Sep, 1984.
  • Ahmad, S., “Factors affecting workability”, The Pakistan Engineers, pp: 21‐35, Sep to Dec, 1983.
  • Ahmad, S.,  Afzal, T., “Effect of in plane shearing stiffness of infill walls on of moment resisting frames of high rise buildings under loads“,Technical Journal UET Taxila, 2010.

Published in International Conferences

  • Ahmad, S., Bukhari, I. A., Elahi, A., “Shear behavior of pre‐stressed concrete beams with varying shear span to depth ratio“, 5th International Symposium on NOTEWORTHY DEVELOPMENTS in PPibsP, Singapore, 25‐27 Aug, 2010.
  • Ahmad, S., Elahi, A., Yaqoob, M., Farooqi, Y., “Control of flexural cracks in a simply supported beam by epoxy injection technique“,35th Conference on Our World in Concrete & Structure, Singapore, 25‐27 Aug, 2010.
  • Ahmad, S.,  Pervaiz, H., “Comparison between factors effecting blast loading on reinforced concrete structural elements“, 5th International Conference on protection of structures against Hazards, Singapore, 15‐16 Nov, 2012.
  • Ahmad, S., Taseer, M.,  Pervaiz, H., “Effects of impulsive load on reinforced concrete structures“,National Workshop on vibration analysis, 2012.
  • Ahmad, S., Iqbal, S., Bukhari, I. A., “Controlling temperatures in mass concrete“, Paper Accepted to be Published / Presented in 34th Conference on Our World in Concrete & Structures, Singapore, 16‐18 Aug, 2009.
  • Ahmad, S., Aslam S., “Experimental investigation of effects of addition of steel and polypropylene fibers on concrete“, 5th Int’l Specialty Conference on Fiber Reinforced Materials, Singapore, 28‐29 Aug, 2008.
  • Mehmood, S., Ahmad, S., “Effects of crushed and natural sand on the properties of fresh and hardened concrete“, 33rd Conference on Our World in Concrete & Structures, Singapore, 25‐27 Aug, 2008.
  • Bukhari, I. A., Vollum, R., Ahmad, S., “Shear strengthening of reinforced concrete beams using carbon fiber‐ reinforced polymer (CFRP) wraps“, Concrete Symposium 2007  Sheffield, 9‐10 Sep, 2007.
  • Ahmad, S., Shah, A., Anwar, K.,  “Study of strength development characteristics of high early strength concrete“,The First International Conference in Recent Advances in Concrete Sheraton Crystal City, Arlington, VA, Washington, D.C. USA, 19‐21 Sep, 2007.
  • Shah, A., Ahmad, S., “An experimental investigation into shear capacity of high strength concrete beams“, Asian Journal of Civil Engineering (Building and Housing), pp: 549‐562, Oct, 2007.
  • Ahmad, S., Shah, A., Saleemi, A., “Comparative study of two commercially available super‐plasticizers on the properties of concrete“,32nd Conference on Our World in Concrete & Structures, Singapore,pp: 93‐100, 28‐29 Aug, 2007.
  • Ahmad, S., Shah, A., “Effect of ground granulated blast furnace slag, on the alkali aggregates reaction for various types of aggregates“, 32nd Conference on Our World in Concrete & Structures, Singapore, pp: 83‐92, 28‐29 Aug, 2007.
  • Ahmad, S., Ali, M., “Comparative study of analysis & design of high rise‐building in non‐seismic & different seismic zones“, 2nd ACF International Conference Bali, Indonesia, pp: 204‐215, 20‐21 Nov, 2006
  • Ahmad, S., Shah, A., “Post earthquake survey and hazard assessment of damaged buildings“, Proceedings of International Conference on Earthquake Engineering, CED, UET Lahore, pp: 63‐71, 8‐9 Nov, 2006.
  • Ahmad, S., Bukhari, I. A., Siddique, J. I., Qureshi S. A., “A study of properties of polypropylene fiber reinforced concrete“,31st Conference on Our World in Concrete & Structure Singapore, pp: 63‐72, 16‐17 Aug, 2006.
  • Ahmad, S.,  Shah, A. H., “Effect of thermal stresses in concrete lining of power channel“,31st Conference on Our World in Concrete & Structure Singapore, pp: 55‐62, 16‐17 Aug, 2006.
  • Ahmad, S., Bukhari, I. A., Elahi, A., Afzal, S., “Production & effects of self‐compacting concrete on various properties of concrete“,31st Conference on Our World in Concrete & Structure Singapore, pp: 49‐54, 16‐17 Aug, 2006.
  • Qureshi, L. A., Ahmad, S.,  Munir, J., “Effect of cement grinding on tensile strength of concrete“,Proceedings of CONCET 2006, 9th International Conference on Concrete Engineering and Technology Kuala Lampur, Malaysia, pp: 233‐243, 9‐10 May 2006.
  • Ahmad, S., “Strengthening & rehabilitation of concrete structures with carbon fiber reinforced polymers (CFRP) “,10th ASCE Aerospace Division International Conference on Engineering Constructions and Operations in Challenging Environment League City/Houston Texas U.S.A, 5‐8 Mar,2006.
  • Bukhari, I. A., Ahmad, S., Zaman, Q., “Failure due to earthquake and strengthening techniques“, Extended Abstracts International Conference on Earthquake in Pakistan, pp: 61‐65, 18‐19 Jan, 2006.
  • Ahmad, S.,  Siddiqui, J. I., Rashid, A., “Evaluation of masonry structure against shock load“,6th Asia‐Pacific Conference on Shock & Impact Loads on Structures in Perth, Australia, pp: 99‐110, 7‐9 Dec, 2005.
  • Ahmad, S.,  Iqbal, J.,  Mehmood, Elahi, A., “Emerging perceptions in impact testing: an experimental attempt“,6th Asia‐Pacific Conference on Shock & Impact Loads on Structures in Perth, Australia, pp: 91‐98, 7‐9 Dec, 2005.
  • Ahmad, S., Yousaf, M., Elahi, A., “Design comparison between aashto & nha pakistan live loading for long span segmentally cast balanced cantilever box‐girder bridge over river indus at khairabad, pakistan“, 4th International Conference on New Dimensions in Bridges, Flyovers, Overpasses & Elevated Structures, Fuzhou, China, pp: 97‐ 104, 24‐25 Oct, 2005.
  • Ahmad, S.,  Iqbal, J., Elahi, A., “Analysis and design considerations of underground structure“,3rd International Conference on “Conceptual Approach to Structural Design” in Singapore, pp:33‐38, 25‐26 Aug, 2005.
  • Ahmad, S., Nawaz, M., Elahi, A., “Effect of super plasticizers on workability and strength of concrete“, 30th Conference on OUR World in Concrete & Structure, Singapore, pp: 141‐152, 23‐24 Aug, 2005.
  • Ahmad, S.,  Shabbir, Z., “Effect of water‐cement ratio on corrosion of reinforced concrete”, 30th Conference on OUR World in Concrete & Structure, Singapore, pp: 135‐140, 23‐24 Aug, 2005.
  • Ahmad, S., Shabbir, F., “Effect of different mix ratios and water cement ratios on sulphate attack on concrete”, 30th Conference on OUR World in Concrete & Structure, Singapore, pp: 127‐134, 23‐24 Aug, 2005.
  • Qureshi, L. A.,  Ahmad, S., Munir, J., “Effect of fineness of cement on workability of concrete with different mix and water cement ratios”, Proceedings of ConMat’05, 3rd International Conference on Construction Materials; Performance innovation and Structural Implications Vancouver, Canada, pp: 27, 22‐24 Aug, 2005.
  • Ahmad, S., Siddiqui, J. I., Mehmood, H., & Raza, S., “Identification of potential for explosions in nuclear power plant”, 18th International Conference on “Structural Mechanics in Reactor Technology” in Beijing, China, pp: 2624‐2630, 7‐12 Aug, 2005
  • Qureshi, L. A.,  Ahmad, S.,  “Effect of fineness of cement on compressive strength of concrete with different mix and water cement ratio”, FTB Symposium “Keep Concrete Attractive” Budapest Hungary, pp: 995‐1002, 23‐25 May, 2005
  • Ahmad, S., Iqbal, I., “Evaluation of control building doors against shock overpressures”, 2nd International Conference on Protection of Structure against Hazards, pp: 87‐94, 2‐3 Dec, 2004
  • Qureshi, L. A., Ahmad, S.,  Yaqub, M.,  “Variation in fineness of portland cement and its effects on physical properties of cement”, Proceedings of 13th International Cement Conference and Exhibition. Muscat, Oman, pp: 140‐149, 23‐26 Nov 2004
  • Qureshi, L. A.,  Ahmad, S.,  Yaqub, M.,  “Variation in fineness of Askari brand cement and its effects on other properties of cement and concrete”, Proceedings of 7th International Conference on Concrete Technology in Developing Countries, Kuala Lampur, Malaysia, Vol: 3, pp: 213‐224, 5‐8 Oct 2004
  • Ahmad, S., Qureshi, L. A., “Variation of fineness of Fecto brand cement and its effects on other properties of cement”, 29th Conference on OUR World in Concrete & Structure, Singapore, pp: 109‐116, 25‐26 Aug, 2004
  • Ahmad, S., “Investigation on extreme weather concreting”, 29th Conference on OUR World in Concrete & Structure, Singapore, pp: 125‐133, 25‐26 Aug, 2004.
  • Ahmad, S., Shah, A., Ali, K., “Effect of water reducing admixtures on the properties of concrete”, 29th Conference on OUR World in Concrete & Structure, Singapore, pp: 117‐124, 25‐26 Aug, 2004.
  • Ahmad, S., Qureshi, T. M., “Effect of subsurface construction on damping response of structure”, 5th Structural Specialty Conference of the Civil Engineering, Saskatoon, Canada, St: 407, pp: 1‐9, 2‐5 June, 2004.
  • Ahmad, S., Ghauri H. W, “Experimental calculation of damping of a slender structure excited by traffic load”, 5th Structural Specialty Conference of the Civil Engineering, Saskatoon, Canada, St: 409, pp: 1‐7, 2‐5 June, 2004.

  

  • Ahmad, S., Elahi, A., “Effect of shear to effective depth ratio on shear capacity of high strength beam”, 28th Conference on OUR World in Concrete & Structure, Singapore, pp: 179‐186, 28‐29 Aug, 2003.
  • Ahmad, S., “Standardization of highway live loading Span bridges”, 3rd International Conference on New Dimensions in Bridges Flyovers, Overpasses & Elevated Structures, Malaysia, pp: 417‐423, 9‐10 Apr, 2003. Published in National Conference

Published in National Conference

  • Ahmad, S., “Variability of concrete and its control”, 26th Annual Convention of IE Pak, pp: 31‐45, 1984.
  1. Qazi Samiullah

Published in International Journal

  • Qazi, L. Michel, E. Ferrier (2015). Impact of CFRP partial bonding on the behaviour of short reinforced concrete wall under monotonic lateral loading. J. Composite structures, vol. 128, p. 251-259.
  • Qazi, L. Michel, E. Ferrier, A. Limam (2015). Strut-and-tie Model for a Reinforced Concrete Wall Strengthened with Carbon Fibre-reinforced Polymers. J. Composite structures, vol. 128, p. 87-99.
  • Qazi, L. Michel, E. Ferrier (2013). Mechanical behaviour of slender RC walls under seismic loading strengthened with externally bonded CFRP. European Journal of Environmental and Civil Engineering, vol 17(6), p. 496-506
  • Qazi, L. Michel, E. Ferrier (2013). Experimental Investigation of CFRP Anchorage Systems used for Strengthening RC Joints. J. Composite structures, vol. 99, p. 453–461
  • Qazi, E. Ferrier, L. Michel, P. Hamelin (2011). Seismic retrofitting of RC Shear wall with external bonded CFRP. ACI Special Publication, vol. 275, p. 1-20

Published in International Conferences

  • Qazi, L. Michel, E. Ferrier (2014). STRUT-AND-TIE MODEL FOR A REINFORCED CONCRETE WALL STRENGTHENED WITH CARBON FIBER-REINFORCED POLYMERS. Proceedings of 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), Vancouver: Canada, 20-23August 2014, p.67.
  • Qazi, L. Michel, E. Ferrier (2014). INFLUENCE OF EXTERNAL CFRP REINFORCEMENT ON BEHAVIOUR OF SHORT RC WALL UNDER CYCLIC LOAD. Proceedings of 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), Vancouver: Canada, 20-23August 2014, p.68.
  • QAZI Samiullah, MICHEL Laurent, FERRIER Emmanuel (2013). Comportement structurel de voiles courts BA renforcés par matériaux composites. Proceedings of 31èmes Rencontres de l’AUGC, E.N.S. Cachan: France, 29 - 31 May 2013, no. 164
  • Qazi, L. Michel, E. Ferrier (2012). MECHANICAL BEHAVIOR OF CFRP STRENGTHENED SHORT RC WALL SUBJECTED TO MONOTONIC AND CYCLIC LOAD TEST. Proceedings of 15th European Conference on Composites Materials ECCM15, Venice: Italy, 24-28 June 2012
  • Qazi, L. Michel, E. Ferrier (2012). MECHANICAL BEHAVIOUR OF SLENDER RC WALL UNDER SEISMIC LOADING STRENGTHENED WITH EXTERNAL BONDED CFRP. Proceedings of Sixth International Conference on FRP Composites in Civil Engineering (CICE 2012), Rome: Italy, 13-15 June 2012
  • Qazi, L. Michel, E. Ferrier (2012). Analyse de la réponse d'un mur élancé en béton armé sollicité sous chargement sismique renforcé par des composites collés. Proceedings of XXXe Rencontres de l’Association Universitaires de Génie Civil, Chambéry : France, 6- 8 June 2012, no. 1281
  • Qazi, L. Michel, E. Ferrier, P. Hamelin (2011). Experimental Investigation of Reinforced Concrete Shear wall Strengthened by Carbon Fibre Reinforced Polymers (CFRP) Strips. Proceedings of an International Conference on Earthquake Engineering and Seismology (ICEES 2011), Islamabad: Pakistan, 25-26 April 2011, p. 358-362
  • SAMI, E. FERRIER, L. MICHEL, A. SI-LARBI, P. HAMELIN (2010). Experimental Investigation of CF Anchorage System used for Seismic Retrofitting of RC Columns. Proceedings of 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing: China, 27-29 September 2010, p.541-544
  1. Badar Ali Zeeshan

Published in International Journal

  • A. Zeeshan, A. De Stefano, S. Invernizzi, “Damage assessment of masonry subjected to microtunneling: tunneling is required for seismic isolation”. In XV Convegno ANIDIS 2013 L'Ingegneria Sismica in Italia, 30 June-4July 2013, 2013, Padova , Italy.

 

Published in International Conferences

  • A. Zeeshan, A. De Stefano, S. Invernizzi, “Effects of using innovative seismic isolation technique on masonry: tunneling work required”. In Earthquake Engineering Structures IX, WIT Transactions on Built The Environment Vol. 132, pp 369-380, 9th International Conference on Earthquake Resistant Engineering Structures, A Coruna, Spain, 8-10 July 2013. e ISBN 978-1-84564-737-7.
  • Zeeshan B-U.A., De Stefano A., Matta E., Quattrone A, “Monitoring of existing masonry buildings during construction of an innovative base-isolation system”. In International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-6),  Hong Kong, December 9-11, 2013, pp. 10, 2013, ISBN: 9789623677684.
  1. Ahsen Maqsoom

Published in International Journal

  • “Internationalization of Service Corporations: Impact of Size and International Experience”, 2014, Journal of Service Management (Emerald)

Authors: Ahsen Maqsoom, Chotchai Charoenngam

  • “Motives and Competitive Assets of Pakistani International Construction Contracting Firms: Impact of Size and International Experience”, 2014, Journal of Financial Management of Property and Construction (Emerald)

Authors: Ahsen Maqsoom, Chotchai Charoenngam

  • “Foreign Market Entry Considerations of Emerging Economy Firms: An Example of Pakistani Contractors”, 2014, Procedia Engineering Journal (Elsevier)

Authors: Ahsen Maqsoom, Chotchai Charoenngam, Rehan Masood, Muhammad Awais

Published in International Conferences

  • “The International Entrepreneurial Dynamics of Pakistani Transnational Contractors”, 2014, 19th International Symposium on the Advancement of Construction Management and Real Estate Management (Springer & Chongqing University, China)

Authors: Ahsen Maqsoom, Chotchai Charoenngam

  • Determinants of successful international expansion of construction contracting firms-A case study of Pakistani firms”, 2014, 30th Annual ARCOM Conference (Association of Researchers in Construction Management, United Kingdom).

Authors: Ahsen Maqsoom, Chotchai Charoenngam

  • “Internationalization process of Pakistani contractors: An exploratory study”, 2013, International Conference on Construction and Real Estate Management (American Society of Civil Engineers - ASCE)

Authors: Ahsen Maqsoom, Chotchai Charoenngam, Muhammad Awais

  • “Foreign market entry considerations of emerging economy firms: An example of Pakistani contractors”, 2013, Fourth International Symposium on Infrastructure Engineering in Developing Countries (NED University of Engineering and Technology, Pakistan)

Authors: Ahsen Maqsoom, Chotchai Charoenngam, Rehan Masood, Muhammad Awais

  • “Analysis of sequencing practices followed by Pakistani contracting firms in the construction of high rise buildings”, 2013, International Conference on Safety, Construction Engineering and Project Management (National University of Sciences and Technology, Pakistan; King Faisal University, Saudi Arabia; Auburn University, USA and University of Florida, USA)

Authors: Sidra Maqsoom, Chotchai Charoenngam, Ahsen Maqsoom, Muhammad Awais

  • “Measuring content of vision statement for imaging future”, 2012, International Scientific Conference People, Buildings and Environment (Brno University of Technology, Czech Republic)

Authors: Rehan Masood, Ahsen Maqsoom, Mahmood Elahi, Muhammad Ali Khan

  • “Strategic factors affecting the internationalization of Pakistani multinational contractors”, 2011, International Construction Management Day (Chartered Institute of Building (CIOB); Construction Management Association of America (CMAA); Construction Management Association of Japan (CMAJ) and International Project Management Association (IPMA)

Authors: Ahsen Maqsoom, Chotchai Charoenngam

  1. Tahir Mehmood

Published in International Journal

  • Mehmood, T; Hussain, K; Warnitchai, P (2015) “Seismic evaluation of flexure–shear dominated RC walls in moderate seismic regions” Magazine of Concrete Research ; DOI: 10.1680/macr.14.00344
  • Saleem, S.; Amorn, P.; and Mehmood, T. (2015)” Finite element modeling of non-ductile reinforced concrete columns” Research and Development Journal, Vol. 26, No. 1, January-March 2015, pp. 23-34.

Published in International Conference

  • Rodsin, K., Warnitchai, P., Awan, T., “Ultimate drift at gravity load collapse of RC non- ductile column”, The 5th Civil Engineering Conference in the Asian Region and Australasian Structural Engineering Conference 2010, Sydney, Australia, 2010, paper 178.
  • Rodsin, K., Awan T., Warnitchai, P. 2010"Seismic performance assessment of existing Non-ductile reinforced concrete columns" ACEE Bangkok 2010.
  • Awan, T., Rodsin, K., Warnitchai, P, 2011"Ultimate drift at gravity load collapse of Lap- Spliced non-ductile column" The International Conference on Earthquake Engineering and Seismology (ICEES – 2011).
  • Mehmood,T ; Pennung, W “Impact of Coupled Axial-flexure-shear Modeling on Seismic demand of High rise Walls” 15th World Conference on Earth Quake Engineering (15th WCEE) 2012, Lisbon, Portugal, Paper ID 2900.
  • Mehmood,T ; Pennung, W and Phichaya, S “A Simplified But Accurate Analysis Procedure for Seismic Evaluation of Tall Buildings”The 5th  Asia Conference on Earthquake Engineering October 16-18, 2014
  • Irshad M. Q , Pennung, W, Mehmood,T “ Investigation of Dynamics Response of Rocking Wall Structures Using Inelastic Modal Decomposition Technique” COMPDYN 2015 5 th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, V. Papadopoulos, V. Plevris (eds.) Crete Island, Greece, 25–27 May 2015
  1. Adil Quddos Khan

Published in International Journal

  • Khan, M.S., S.R. Ahmad, A.Q. Khan, S. Ghazi and S. Ali, 2012. Sewage Water Intrusion in the Groundwater of Lahore, its Causes and Protections. Pak. J. Nutr., 11 (5): 484-488, 2012.

Published in International Conferences

  • Ahmad, S.R., Z. Mustafa and A.Q. Khan, 2014. Application of Geomatics techniques for Geological and Geomorphological survey of Murree Area, Pakistan. International Conference on Earth Science Pakistan, Baragali Summer Campus, University of Peshawar.
  • Ahmad, S.R., H.N. Chaudhry, S.A. Razi and A.Q. Khan, 2014. Hydropower Potential Site investigation in Bhalgran Using Remote Sensing and GIS Techniques. International Conference on Earth Science Pakistan, Baragali Summer Campus, University of Peshawar.
  1. Yasir Ali

Published in International Journal

  • Ali, Y., Irfan, M., Ahmed, S., Khanzada, S., and Mahmood, T., (2014), Investigation of Factors Affecting Dynamic Modulus and Phase Angle of Various Asphalt Concrete Mixtures, Materials and Structures (Springer), 10.1617/s11527-015-0544-3.
  • Ali, Y., Irfan, M., Ahmed, S., Khanzada, S., and Mahmood, T., (2014), Sensitivity Analyses of Dynamic Response and Fatigue Behavior of Various Asphalt Concrete Curriculum Vitae (continued) Mixtures. Fatigue and Fracture of engineering Material and Structures. (Wiley & Sons), Accepted in Press.
  • Ali, Y., Irfan, M., Ahmed, S., and Khanzada, S., (2014). An Analysis and Empirical Correlation of Dynamic and Resilient Modulus Test Results for Asphaltic Concrete Mixtures. Submitted for Presentation in 94th Transportation Research Board Annual Meeting and Publication in Transportation Research Record. Under review.
  • Waraich, A., S. Irfan, M., Ahmed, S., and Ali, Y. (2014). Characterization of Various Plant Produced Asphalt Concrete Mixtures Using Dynamic Modulus Test. ASTM Journal of Testing and Evaluation, Under Review.

 

Published in International Conferences

  • Irfan, M. And Ali, Y. (2014). Laboratory Characterization of Asphalt Concrete Mixtures using Dynamic Modulus Test. Presented at 1st International Seminar: Improvement of Asphalt Mix Design Technology for Pakistan, Islamabad, May 14-15.
  • Memon, N., A. Ali, Y., Buller, A., S. (2012). Role of Resin in Construction under the Local Environmental Conditions of Nawabshah. 2 nd International conference on “Energy and Environment: Role of Energy Resources in Sustainability of Environment”. 16-18 January, 2012, held at QUEST, Nawabshah.

 

  1. Summera Fehmi Khan

Published in International Conference

  • Khan, S. F., Taseer, M. and Ejaz, N. (2007). Impacts of Municipal Solid Waste Open Dumps on Environment. 2nd International Conference “Environmentally Sustainable Development” 26-28 August 2007, held at COMSAT Abbottabad.
  • Taseer, M., Ejaz, N. and Khan, S. F. (2007). Impacts of Industrial Waste Water on Marine Life. 2nd International Conference “Environmentally Sustainable Development” 26-28 August 2007, held at COMSAT Abbottabad.
  1. Hammad Anis Khan

Published in International Journal

  • Khaliq, W. and Khan, H. A. (2015) “High Temperature Material Properties of Calcium Aluminate Cement Concrete” Construction and Building Materials, Vol. 94, pp. 475 – 487.

Published in International Journal

  • Khaliq, W. and Khan, H. A. (2015) “High Temperature Material Properties of Calcium Aluminate Cement Concrete” 26 - 28 June, 2015, Proceedings: Protect2015 - Fifth International workshop on performance, protection & strengthening of structures against extreme loading, held at Michigan state university, USA.
  1. Rana Faisal Tufail

Published in International Journal

  • Effect of FRP on compressive strength of unheated and post heated concrete,

“First author” Life science journal ISSN: 1097:8135

  • Effect of carbon fibre reinforced polymer jacketing on low, normal, medium and high strength

concrete, “First author” Life science journal ISSN: 1097:8135

  • Experimental versus design guideline predictions for confined strength and axial load carrying capacity of circular concrete cylinders wrapped with CFRP, “First author”

Life science journal ISSN: 1097:8135

  • Effect of Carbon Fiber Reinforced Polymer Confinement on the Fire Damaged and Un-heated Reinforced Concrete Square Columns, Life science journal ISSN: 1097:8135
  • The Evaluation of Structural Performance of New Benazir Bhutto International Airport Islamabad, Pakistan, Life science journal ISSN: 1097:8135
  • Resilient modulus of different asphalt mixtures of varying bitumen content by performing Creep test using UTM-5P
  • Experimental Investigation of CFRP wrapped Low and Normal Strength Concrete Cylinders.
  • Experimental Investigation for carbon fiber wrapped low and normal strength concrete. Under Review.
  • Design of Low Cost Building using Structural Concrete Insulated Panels and their comparison of cost and time. “Under Review”
  • Utilization of Used Foundary Sand as a Partial Replacement of Fine Aggregate in concrete” Under Review.