Research Publications

Following is the list our research papers.

LIST OF PUBLICATIONS

A. INTERNATIONAL JOURNAL PAPERS

Prof. Dr. Muhammad Abid

S.#

Name of Author(s)

Complete Name of Journal

ISSN

Title of the Publication

Vol/ Page #

Year

IF

Citation as per Google Scholar

1

D H Nash and M Abid

International Journal of Pressure Vessels and Piping

0308-0161

Combined external loads tests for standard and compact flanges

Vol. 77 No. 13, pp. 799-806

2000

1.68

34

2

D H Nash, J Spence, A S Tooth, M Abid and D J Power

International Journal of Pressure Vessels and Piping

0308-0161

A parametric study of metal-to-metal full face taper-hub flanges

Vol. 77 No. 13, pp. 791-798.

2000

1.68

29

3

M. Abid, D. H. Nash

International Journal of Pressure Vessels and Piping,

0308-0161

Comparative study of the behaviour of conventional gasketed and compact non-gasketed flanged pipe joints under bolt up and operating conditions’

Vol. 80, Issue 12, pp. 831-841.

2003

1.68

66

4

M. Abid, D. H. Nash

International Journal of Pressure Vessels and Piping

0308-0161

A parametric study of metal-to-metal contact flanges with optimized geometry for safe stress and no-leak conditions

Vol. 81, Issue 1, pp. 67-74.

2004

1.68

55

5

M Abid, D H Nash

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Surface sensitivity study of non-gasketed flange joint

Vol. 218, pp. 205-212.

2004

1.11

18

6

M Abid, D H Nash

International Journal for Strain Measurement.

0039-2103

Leakage criteria through a non-gasketed pipe joint

Vol. 206, pp. 1-16.

2004

1.63

0

7

M. Siddique, M. Abid, H. F. Junejo, R. A. Mufti,

Journal of Material Science Forum

0255-5476

3D finite element simulation of welding residual stresses in pipe-flange joints: effect of welding parameters

Vol. 490-491, pp. 79-85.

2005

0.33

24

8

M. Abid, M. Siddique, R.A. Mufti

Journal of Modelling and Simulation in Materials Science and Engineering

0965-0393

Prediction of welding distortions and residual stress in pipe-flange joint using finite element technique

Vol. 13, pp. 455–470.

2005

1.86

43

9

M. Abid, D. H. Nash

Journal of Engineering Integrity Society

1365-4101

FMEA of Gasketed and Non-gasketed bolted flanged pipe joints

Vol. 17, pp. 14-21.

2005

0.00

8

10

M. Abid, M. Siddique

Journal of Acta Mechanica.

0001-5970

Finite Element Simulation of Tack Welds in Girth Welding of Pipe-Flange Joint

Vol. 178, No.1-2, pp. 53-64.

2005

1.69

13

11

M. Abid, M. Siddique

International Journal of Pressure Vessels and Piping.

0308-0161

Numerical simulation to study the effect of tack welds and root gap on welding deformations and residual stresses of a pipe-flange joint

Vol. 82, pp. 860-871.

2005

1.68

111

12

Muhammad Abid, Muhammad Siddique

Journal of Modelling and Simulation in Materials Science and Engineering, Institute of Physics

0965-0393

Numerical Simulation of the effect of Constraints on Welding Deformations and Residual Stresses in a Pipe-Flange Joint

pp. 919-933

2005

1.86

23

13

M. Siddique, M. Abid

Journal of Modelling and Simulation in Materials Science and Engineering, Institute of Physics.

0965-0393

Numerical Simulation of mechanical stress relieving in a multi-pass GTA girth welded pipe-flange joint to reduce IGSCC

Vol. 13, pp. 1383-1402.

2005

1.86

10

14

M. Abid

International Journal of Mechanics and Materials in Design

1359-5997

Determination of gasketed and non-gasketed flanged pipe joint’s capacity subjected to combined loading: An experimental approach

DOI 10.1007/s10999-005-0519-6.

Vol. 2, pp. 35-47.

2005

1.93

15

15

Muhammad Siddique, Muhammad Abid

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

FE Simulation of Mechanical Stress Relieving in Welded Pipe-Flange Joint

DOI:10.1243/095440805X69316. pp. 1-9.

2005

1.11

6

16

Muhammad Abid

International Journal of Mechanics and Materials in Design

1359-5997

Determination of safe operating conditions for non-gasketed flange joint under combined internal pressure and temperature

DOI 10.1007/s10999-005-4447-2.

Vol. 2, pp. 129-140

2005

1.93

17

17

M. Abid, M.G. Bannikov, J.A. Chattha, Himmat Ali

Scientific Journal VISNIK

1998-7927

3-D Finite Element Analysis of a diesel engine piston

Vol. 6 (80), pp. 103-106

2005

0.00

0

18

M.G. Bannikov, M. Abid, J.A. Chattha, A. Salam

Scientific Journal VISNIK

1998-7927

Strength analysis of a crankshaft of an augmented diesel engine

Vol. 6 (80), pp. 97-101

2005

0.00

0

19

M. Abid, D. H. Nash

International Journal of Solids and Structures.

0020-7683

Structural Strength: Gasketed Vs Non-gasketed flange joint under bolt up and operating condition

Vol. 43, pp. 4616-4629

2006

2.56

28

20

Muhammad Abid

International Journal of Pressure Vessels and Piping.

0308-0161

Determination of safe operating conditions for gasketed flange joint under combined internal pressure and temperature – A FEA approach

pp. 433-441

2006

1.68

30

21

Muhammad Abid

International Journal of Science and Technology, Scientia Iranica

1028-6284

Stress variation in flange of a gasketed flanged pipe joint during bolt up and operating conditions

Vol. 13/3, pp. 303-309

2006

1.03

10

22

M Abid and D H Nash

WSEAS Transactions on Applied and Theoretical Mechanics

1991-8747

Relaxation behaviour of a gasketed and non-gasketed bolted flanged pipe joint - A Comparative Study

Vol. 1, Issue-2, pp. 239-246

2006

0.32

14

23

Muhammad Abid, Baseer Ullah

Journal of Engineering Mechanics

0733-9399

Three Dimensional Nonlinear Finite Element Analysis of Gasketed Flange Joint under Combined Internal Pressure and Variable Temperatures

Vol. 133/2 pp. 222-229

2007

1.35

26

24

M. Abid, M. Iqbal

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Determination of optimized non-gasketed flange geometry for safe stress and no leak condition: FEA Approach

Vol. 222, Part E, pp. 31-39

2008

1.11

1

25

Kh. S. Karimov, Muhammad Abid

Journal of Environmental Sciences, Technologies and Engineering

1684-8012

Solar Biogas Digester

Vol. VII No. 2, pp. 4-7

2007

0.00

0

26

I. Salam, M. Abid, M.A. Malik

International journal of systems applications, engineering & development.

2074-1308

Crack growth prediction in a thick cylinder under fatigue loading – an FEA Study

Vol 1, Issue 3, pp. 51-55

2007

0.00

3

27

Muhammad Abid, J. A. Chattha

Asian Journal of Water, Environment and Pollution

0972-9860

Environmental problems associated with the paint sector in Pakistan and their assessmen

 Vol. 5, pp. 75-80

2008

0.42

0

28

Muhammad Abid and Saad Hussain

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Bolt preload scatter and relaxation behavior during tightening a 4 inch, 900# flange joint with spiral wound gasket

Vol 222/2, pp. 123-134

2008

1.11

13

29

M A Malik, I Salam, and M Abid

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Experimental and numerical study to predict crack growth in a thick cylinder under fatigue loading

Vol. 222, pp. 85-92

2008

1.11

2

30

Kh.S. Karimov, Muhammad Abid, I. Qazi, T.A. Khan, I. Murtaza

Journal of Environmental Sciences, Technologies and Engineering

1684-8012

Multi-Functional Organic Semiconductor Sensor for Environmental Monitoring

Vol. VII No. 1&2, pp. 20-27

2008

0.00

0

31

M. Abid, K. A. Khan, J. A. Chattha,

Mechanics Based Design of Structures and Mechanics.

1539-7734

Performance of a flange joint using different gaskets under combined internal pressure and thermal loading

 Vol. 36/2, pp. 212-223

2008

1.51

8

32

Muhammad Abid, Abdul Waheed Awan, D. H. Nash

Proc. IMechE, Part E: J. Process Mechanical Engineering

0954-4089

Stamina of a non-gasketed flange joint under combined internal pressure and axial loading

Vol. 222/3, pp. 143-155

2008

1.11

2

33

Muhammad Abid

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Performance testing of gasketed flange joint under combined loading

Vol. 223, pp. 91-95

2009

1.11

5

34

Muhammad Abid, David H. Nash

J. Pressure Vessel Technology.

0094-9930

Stamina of a non-gasketed flange joint under combined internal pressure, axial and bending loading

Vol 131, Issue 3, 031203. pp. 1-7

2009

0.75

2

35

Muhammad Abid, Muhammad Iqbal, Baseer Ullah

Proc. IMechE, Part E: J. Process Mechanical Engineering,

0954-4089

Comparative thermal stress analysis of gasketed and non-gasketed flange joints

Vol. 223, pp. 167-178

2009

1.11

3

36

K. A. Khan, M. Abid, J. A. Chattha

Proc. IMechE, Part E: J. Process Mechanical Engineering,

0954-4089

Gasketed bolted flange joint’s relaxation behavior under different bolt up strategy

Vol. 223/4, pp.259-263.

2009

1.11

7

37

Muhammad Rashid, Guangyuan He, Muhammad Abid and Yu Long Jiang

Journal of Environmental Sciences, Technologies and Engineering

1684-8012

Role of microorganisms in bioenergy production - Bioenergy the future demand

Vol. IX, No. 11&12, pp. 4-12

2009

0.00

0

38

Riaz Muhammad, Muhammad Abid, Naseer Ahmad and Vadim Silberschmidt

Journal of Machining and Forming Technologies.

1947-4369

 

3D modeling of drilling process of AISI 1010 steel

pp. 1-15

2009

0.00

10

39

M. Abid and M. J. Qarni

Turkish J. Eng. Env. Sci

1300-0160

3D thermal finite element analysis of single pass girth welded low carbon steel pipe-flange joints.

Vol. 33, pp. 281-293

2009

0.62

10

40

Muhammad Abid and Saad Hussain

SADHANA Indian Academy of Sciences Proceedings in Engineering Sciences

0256-2499

Relaxation behavior of gasketed flange joints during assembly using FEA

Vol. 35, part 1, pp 31-43

2010

0.35

13

41

Kh. S. Karimov, Muhammad Abid

Kuwait J. Sci. Eng.

024-8684

Investigation of a photo-voltaic system with variable solar modules inclination angles

Vol. 37 (1A), pp. 99-109

2010

0.36

2

42

M. Abid and M. J. Qarni

Proc. IMechE, Part E: J. Process Mechanical Engineering.

0954-4089

Numerical investigation of residual stresses and distortions due to multi-pass welding in a pipe flange joint

Vol. 224/4, pp. 253-267

2010

1.11

7

43

Muhammad Abid, Abdul Waheed Awan, David H. Nash

J. Engrg. Mech.

0733-9399

Performnce of a non-gasketed flange joint under combined internal pressure and bending loading

Vol. 136, Issue 12, pp. 1519-1527

2010

 

1.35

5

44

Saif Ullah, Ghulam Zakria, Muhammad Abid

The Technology World Journal.

2180-1614

A Heuristic for Robust Scheduling of Two Machine Flow Shop

Vol. II, Issue 1. pp. 253-257.

2010

0.00

0

45

Muhammad Abid

The Technology World Journal.

2180-1614

Behavior of the gasketed flange joints of different sizes-A parametric FEA study

Vol. II, Issue 1. pp. 101-106

2010

0.00

1

46

Muhammad Abid and Khurshid Alam

The Technology World Journal.

2180-1614

Analytical and experimental study of Push Pipe Joints under internal pressure and temperature loading

Vol. II, Issue 1. pp. 282-293

2010

0.00

0

47

Muhammad Abid, Muftooh Ur Rehman Siddiqi

Journal of Water Resource and Protection

1945-3108

Multiphase Flow Simulations through Tarbela Dam Spillways and Tunnels

pp. 532-539

2010

0.62

1

48

Muhammad Abid, Adnan Aslam Noon

Journal of Engineering

1947-3931

Turbulent flow simulations through Tarbela Dam Tunnel-2

Vol. 2/7, pp. 205-213

2010

0.37

1

49

Muhammad Abid

IIUM Engineering Journal.

1511-788X

Comparative performance study of gasketed and non-gasketed flange joints under combined internal pressure, axial and bending loading - An experimental study

Vol. 11, No. 2, Pp. 179-200.

2010

0.00

3

50

Muhammad Abid, Adnan Aslam Noon, Hafiz Abdul Wajid

IIUM Engineering Journal

1511-788X

Simulations of turbulent flow through Tarbela Dam Tunnel 3.

Vol. 11, No. 2, Pp. 201-224.

2010

0.00

3

51

Kh. S. Karimov, Muhammad Abid, Z. M. Karieva, S. A. Moiz

The Mediterranean Journal of Measurement and Control

1743-9310

Organic materials sensors for environmental monitoring and assessment

Vol. 6, No. 4, pp. 155-157.

2010

0.12

0

52

Muhammad Abid, Kamran Ahmed Khan, Javed Ahmad Chattha

Experimental Techniques.

0732-8818

Performance testing of a gasketed bolted flange pipe joint under combined pressure and thermal loading

pp. 1-3

2011

0.72

2

53

Masroor Hussain, Muhammad Abid, Mushtaq Ahmad, Ashfaq Khokhar, Arif Masud

Int J Parallel Prog

0885-7458

A Parallel Implementation of ALE Moving Mesh for FSI Problems using OpenMP

DOI 10.1007/s10766-011-0168-3.

2011

0.99

5

54

Kh.S. Karimov, M. Abid, M. Mahroof-Tahir, M. Saleem, Adam Khan, Z.M. Karieva, M. Farooq

Microelectronic Engineering

0167-9317

V2O4–PEPC composite based pressure sensor.

Vol. 88, pp. 1037–11041

2011

1.28

2

55

Khasan S. Karimov, Muhammad Abid

IIUM Engineering Journal, Special Issue in Science and Ethics

1511-788X

Combined uncovered sheet-and-tube PVTcollector system with built-in storage water heater 

V1ol. 12, No. 6

pp. 1-7

2011

0.00

1

56

Muhammad Abid and Atta ur Rehman Shah

NED University Journal of Research

1023-3873

Performance of a gasketed bolted flanged pipe joint under boltup, internal pressure and dynamic (harmonic and transient) axial loads

Vol. VIII, No. 2. Pp. 62-69.

2011

0.96

1

57

Kh.S. Karimov, M.Abid, M. Saleem, M. Farooq, Z.M. Karieva, Adam Khan

Arabian Journal for Science and Engineering (AJSE).

1319-8025

Cu2O-PEPC Composite Based Pressure Transducer.

37:1491–1498

DOI 10.1007/s13369-012-0239-9

2012

0.73

0

58

Khasan S. Karimov, Muhammad Abid

IIUM Engineering Journal

1511-788X

Solar biogas digester with built-in reverse absorber heater

Vol. 13, No. 2.

pp. 109-120

2012

0.00

0

59

Muhammad Abid, Sattar Ullah

IIUM Engineering Journal

1511-788X

Investigation of Residual Stresses and Distortion in Welded Pipe-Flange Joint of Different Classes

Vol. 13, No. 2.

pp. 145-154

2012

0.00

1

60

M. Abid, S. Parvez, D. H. Nash

Proceedings of the IMechE Part B. Journal of Engineering Manufacture

0954-4054

3D simulation of stationary gas tungsten arc welding of L-shape, V-shape and Open-corner joints

226 (8), 1354-1368

2012

0.78

0

61

Muhammad Abid, Shahid Maqsood and Hafiz Abdul Wajid

Advances in Mechanical Engineering

1687-8132

Comparative Modal Analysis of Gasketed and Nongasketed Bolted Flanged Pipe Joints: FEA Approach

pp. 1-8

doi:10.1155/2012/413583

2012

0.81

2

62

Muhammad Abid, David H Nash, Shahid Parvez, Hassan F Junejo, Alex Galloway

Journal of Engineering Mechanics

0733-9399

Effect of torch angle on arc properties and weld pool shape in stationary GTAW

139 (9). pp. 1268-1277.

doi: 10.1061/(ASCE)EM.1943-7889.0000553

2013

1.34

2

63

Muhammad Abid, Ali Waqas

Journal of Engineering Research

2307-1885

Analysis and Redesign of Bolster Beam of the Bogie Frame of a Locomotive

Vol -1 /1 pp. 271-287

2013

0.00

1

64

Khasan S. Karimov, Muhammad Abid

Mehran University Journal of Engineering and Technology

0254-7821

Solar biogas digester with built-in reverse absorber heater

Vol 32, No. 1, pp. 39-46

2013

HEC

X-Category

0

65

Muhammad Abid and Yasir Mehmood Khan

Structural Engineering and Mechanics

1225-4568

The effect of bolt tightening methods and sequence on the performance of gasketed bolted flange joint assembly

Vol. 46, No. 6, pp. 843-852

2013

1.04

8

66

Khasan.S.Karimov, Khakim M. Akhmedov, Muhammad Abid, Georgiy N. Petrov

Science of the Total Environment (STOTEN)

0048-9697

Effective Management of Combined Renewable Energy Resource in Tajikistan

10.1016/j.scitotenv.2013.05.095 (pp. 1-4)

2013

4.20

4

67

M. Abid, S. Parvez, D.H. Nash

International Journal of Pressure Vessels and Piping

0308-0161

Effect of different electrode tip angles with tilted torch in stationary

gas tungsten arc welding: A 3D simulation

Vol 108-109, pp. 51-60

2013

1.68

2

68

Kh.S. Karimov, M.Abid, S.I.Islomov, N.H.Karimova

IIUM Engineering Journal

1511-788X

The economics of biogas production

Vol. 14, No. 2, 2013. Pp. 145-152

2013

0.00

0

69

Kh.S. Karimov, M.Abid, M.W. Al-Grafi, S.I.Islomo, N.H.Karimova

IIUM Engineering Journal

1511-788X

The economics of micro hydro power plants

Vol. 14, No. 2, 2013. Pp. 173-181

2013

0.00

0

70

Kh.S. Karimov, M.Abid, S.I.Islomov, N.H.Karimova

NED University Journal of Research

1023-3873

The economics of photovoltaic installations in GIK Institute of Pakistan

Vol 10, No. 2. Pp. 1-7

2013

0.96

0

71

Muhammad Abid, Hafiz Abdul Wajid, Naeem Dad Khan,

Saddam Akhtar, Mirza Ahsan Zahid and Muhammad Usman

World Applied Sciences Journal

1818-4952

Optimization of Ventilation System For existing Environmentally

Controlled Poultry Sheds in Pakistan

24 (9): 1221-1233, DOI: 10.5829/idosi.wasj.2013.24.09.1128

2013

0.47

1

72

Muhammad Abid, M.W.Al-Grafi, Hafiz Abdul Wajid.

World Applied Sciences Journal

1818-4952

Effect of bolt behavior on the performance of a bolted joint

26 (1): 89-96, DOI: 10.5829/idosi.wasj.2013.26.01.1356

2013

0.47

2

73

Muhammad Abid, Al-Grafi

World Applied Sciences Journal

1818-4952

Implementation of integrated process plan for an artificial hip implant

l 26 (3): 366-373, DOI: 10.5829/idosi.wasj.2013.26.03.1517

2013

0.47

0

74

Kh.S.Karimov, M. Abid, N. Ahmed, Kh.M.Akhmedov, G.N.Petrov.

World Applied Sciences Journal

1818-4952

Rogun hydropower plant project of Tajikistan: expected benefits for neighboring countries

26 (2): 239-243,

DOI: 10.5829/idosi.wasj.2013.26.02.1404

2013

0.47

1

75

Masroor Hussain, M. Abid, Mushtaq Ahmed.

World Applied Sciences Journal

1818-4952

A Parallel 2D Stabilized Finite Element Method for Darcy Flow using MPI

27 (9): 1119-1125

DOI: 10.5829/idosi.wasj.2013.27.09.15177

2013

0.47

2

76

Muhammad Abid, Abdul Waheed Awan, David H. Nash

Journal of the Brazilian Society of Mechanical Sciences and Engineering

1678-5878

Determination of load capacity of a non-gasketed flange joint under combined internal pressure, axial and bending loading for safe strength and sealing.

J Braz. Soc. Mech. Sci. Eng.

DOI 10.1007/s40430-014-0136-0

2014

0.47

1

77

M. Abid

NED University Journal of Research

1023-3873

Parametric study of gasketed flange joints of different sizes and classes for improved design and performance

VOL XI, NO. 1, 2014. Pp. 39-47

2014

0.96

4

78

Muhammad Abid, Khasan S. Karimov and Hafiz A. Wajid

Iranica Journal of Energy & Environment

2079-2115

Numerical and Experimental Analysis of a Spiral Horizontal Axis Wind Turbine

5 (1): 13-17, 2014

DOI: 10.5829/idosi.ijee.2014.5.1.513

2014

1.06

0

79

Muhammad Abid, Suleman Ayub, Humza Wali, Muhammad Najam Tariq

International Journal of Science and Advanced Technology

2221-8386

Reliability centered maintenance plan for the utility section of a fertilizer industry: A case study

4 (3), pp. 9-16

2014

0.00

0

80

Muhammad Abid, Adnan Aslam Noon, M.W. Al-Grafi, Hafiz Abdul Wajid

Iranian Journal of Science and Technology–Trans of ME

2228-6187

Erosion study of Tarbela Dam Tunnel-1

Vol. 38, No. M1, pp 253-261

2014

1.05

2

81

Kh.S.Karimov, M.Abid, M.Saleem, Kh.M.Akhmedov, M.Mehran Bashir, U.Shafique, M.Ali

Physica B

0921-4526

Temperature gradient sensor based on CNT composite

446C. pp. 39-42.

2014

1.50

2

82

Kh.S.Karimo, Muhammad Abid, Cheong Kuan Yew, Nisar Ahmed,

Muhammad Mehran Bashir, Zameer Abbas

Advanced Materials Research

Trans Tech Publications, Switzerland

1022-6680

Silicon Based Thermoelectric Cells with Built in Solar Cells and CNT

Composite Based Thermoelectric Cells for Measurement of Gradient of

Temperature

Vol. 1024, pp 385-392

doi:10.4028/www.scientific.net/AMR.1024.385

2014

0.23

0

83

 N.H.Karimova, S.I.Islomov, Kh.M.Akhmedov, Muhammad Abid, Kh.S.Karimov

Bulletin of Tajik National University

 

The economics of biogas production

No.1 pp.183-189

2014

0.00

0

84

Muhammad Abid, Kamran Ahmed Khan, Javed Ahmad Chattha, Hafiz Abdul Wajid

IIUM Engineering Journal

1511-788X

Sealing performance of gasketed flange joints – A parametric study

Vol. 15, No. 2, pp. 59-67

2014

0.00

0

85

H.A.Wajid, M. Abid, A. Sohail

MATEMATIKA

0127-8274

Compact Schemes for the Simulations of Wave Propagations

Vol. 30, pp. 85-89

2014

0.00

0

86

Muhammad Abid, Khasan S Karimov, Hafiz Abdul Wajid, Fahmid Farooq, Haroon Ahmed, Omar Hafeez Khan

Iranica Journal of Energy and Environment

2079-2115

Design, Development and Testing of a Combined Savonius and Darrieus Vertical Axis Wind Turbine

Vol. 6, No. 1, pp. 15-18

2015

1.06

0

87

Muhammad Tariq Saeed Chani, Sher Bahadar Khan, Kh. S. Karimov, M. Abid, M. Mehran Bashir, Abdullah M. Asiri, Kalsoom Akhtar

Journal of Optoelectronics and Advanced Materials -Rapid Communication

1454-4164

Influence of pressure on the impedance of SnO2 nanopowder

Vol. 9, No. 1-2, pp. 114 - 119

2015

0.56

2

88

Muhammad Abid, Muhammad Hammad Akmal, Hafiz Abdul Wajid

Iranian Journal of Science and Technology–Trans of ME

2228-6187

Design optimization of box type girder of an overhead crane

Vol. 39, No. M1, pp 101-112

2015

1.05

0

89

Muhammad Abid, Ahmad Abbas, Yasir Mehmood, Hafiz Abdul Wajid

Iranian Journal of Science and Technology–Trans of ME

2228-6187

Assembly performance of a gasketed bolted flanged pipe joint using different bolt tightening strategies

Vol. 39 No M1+. 253-260

2015

1.05

1

90

Muhammad Tariq Saeed Chani, Sher Bahadar Khan, Kh. S. Karimov, M. Abid, Abdullah M. Asiri, Kalsoom Akhtar, 

Journal of Semiconductors

 

Synthesis of metal oxide composite nanosheets and their pressure sensing properties

Vol. 36/2, pp. 1-6

2015

0.50

2

91

Muhammad Abid, Muhammad Shahid Khalil, Hafiz A. Wajid

IIUM Engineering Journal

1511-788X

An experimental study on the relaxation of bolts

Vol. 16/1, pp. 43-52

2015

0.00

0

92

Muhammad Abid, Sattar Ullah, Hafiz Abdul Wajid

Iranian Journal of Science and Technology–Trans of ME

2228-6187

Parametric study for residual stresses and deformations in welded pipe-flange joints

Vol. 39 No M2. Pp. 427-436

2015

1.05

0

93

Muhammad Abid, Ayesha Khan, Hafiz Abdul Wajid, Masroor Hussain

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Optimized bolt tightening procedure for different tightening strategies - FEA study

Vol. 0(0)

pp. 1-14

2015

1.11

2

94

Muhammad Abid and Niaz Bahadur Khan

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Joint Strength of gasketed bolted pipe flange joint under combined internal pressure plus axial load with different (Industrial and ASME) bolt up strategy

Vol. 0(0)

pp. 1-10

2015

1.11

0

95

M. Abid, A. Khan, D.H. Nash, M. Hussain, H.A. Wajid

Procedia Engineering

Elsevier

1877-7058

Simulation of Optimized Bolt Tightening Strategies for Gasketed Flanged Pipe Joints of Different Sizes

130

204 – 213

2015

0.73

4

96

M. Abid, A. Khan, D.H. Nash, M. Hussain, H.A. Wajid

International Journal of Pressure Vessels and Piping.

0308-0161

Optimized Bolt Tightening Strategies for Gasketed Flanged Pipe Joints of Different Sizes

http://www.sciencedirect.com/science/article/pii/S030801611630076X

1-6

http://dx.doi.org/10.1016/j.ijpvp.2016.02.022

2016

1.68

2

97

Muhammad Abid, Jamal Saeed, Hafiz Abdul Wajid

Journal of Engineering

2228-6187

Sediment and cavitation erosion studies through Dam Tunnels

https://www.hindawi.com/journals/je/2016/8645789/

pp. 1-7 http://dx.doi.org/10.1155/2016/8645789

2016

1.05

0

98

Muhammad Abid

IIUM Engineering Journal

1511-788X

Energy audit of a textile mill – A case study

http://journals.iium.edu.my/ejournal/index.php/iiumej/article/view/561

Vol, 17/1, 41-48

2016

0.00

0

99

Muhammad Abid, Atta ur Rehman Shah, Hafiz Abdul Wajid.

IIUM Engineering Journal

1511-788X

Stamina of a gasketed bolted flanged pipe joint under bolt up, internal pressure and dynamic loading.

http://journals.iium.edu.my/ejournal/index.php/iiumej/article/view/565

Vol. 17/2, 137-155

2016

0.00

0

100

Zeshan Ahmad, Tipu Sultan, Matteo Zoppi, Muhammad Abid & Gyung Jin Park

Engineering Optimization

0305-215X

Nonlinear Response Topology Optimization using Equivalent
Static Loads - Case Studies

http://www.tandfonline.com/doi/full/10.1080/0305215X.2016.1187728

DOI: 10.1080/0305215X.2016.1187728

2016

1.38

1

101

Muhammad Abid, Masroor Hussain, Ayesha Khan, Hafiz Abdul Wajid

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Application of monotonic adaptive kernel for optimization – A Case study

http://journals.sagepub.com/toc/pie/0/0

0(0) 1–9
DOI: 10.1177/0954408916688501

2017

1.11

 

102

Khasan S. Karimov Zubair Ahmad Noshin Fatima Muhammad Mansoor Ahmed Muhammad Abid

Pigment & Resin Technology

0369-9420

Effect of humidity on

copper phthalocyanine films deposited at different gravity conditions

http://www.emeraldinsight.com/doi/abs/10.1108/PRT-11-2014-0105?af=R&

Vol. 46/1

pp. 64 - 70

2017

0.700

 

103

Niaz B Khan, Muhammad Abid

Proc. IMechE Part E: J. Process Mechanical Engineering

0954-4089

Behavior of gasketed bolted pipe flange joint under combined load of Internal (pressure) and external (axial and bending) loading: 3-dimesnional numerical study

http://journals.sagepub.com/toc/pie/0/0

0(0) 1–9
DOI: 10.1177/0954408917697888

2017

1.11

 

104

Muhammad Umer, Muhammad Abid

Asian Journal of Water, Environment and Pollution

0972-9860

Economic practices in plastic industry from raw material to waste in Pakistan: A Case Study

http://www.iospress.nl/journal/asian-journal-of-water-environment-and-pollution/

Vol. 14/2, 81-90

2017

0.00

 

105

Skarimov K, Muhammadabid, Baig DEZ, Moiz SA, Khan A, Qasuria
TA, Khmedov K, Ali M, Rao U

Acad. J. Sci. Res.

2315-7712

Combined Photo-Electric Cell and Thermoelectric Generator for Demonstrative
Purposes

academiapublishing.org/journals/ajsr/pdf/2017/Jan/Skarimov%20et%20al.pdf

5(1)

DOI: 10.15413/ajsr.2017.016

pp. 22-33

2017

0.315

 

106

Shahab U. Ansari,

Masroor Hussain,

Muhammad Abid,

Tareq Manzoor,

Suleman Mazhar,

Khalid J. Siddiqui,

Habibullah Jamal

Archives of Computational Methods in Engineering

1134-3060

Mesh Partitioning and Efficient method of Equation Solving Techniques by Distributed Finite Element Methods - A Survey

https://link.springer.com/article/10.1007/s11831-017-9227-2?wt_mc=Internal.Event.1.SEM.ArticleAuthorOnlineFirst

10.1007/s11831-017-9227-2

pp. 1-16

2017

4.214

 

107

Manzoor T, Khalil S, Khan I, Gohar GA and Abid M

Journal of Applied
Mechanical Engineering

2168-9873

Design and Development of Flexible Vacuum Clamping System for Thin
Walled Cylindrical Object for CNC Machines

https://www.omicsonline.org/open-access/design-and-development-of-flexible-vacuum-clamping-system-for-thinwalled-cylindrical-object-for-cnc-machines-2168-9873-1000271.php?aid=91285

6(4), doi: 10.4172/2168-
9873.1000271

pp. 1-10

2017

0.80

 

108

M Abid, M. Umer

Editor: Francesca Girotto

A glance at the world / Waste Management

0956-053X

Economic practices in plastic industry from raw material to
waste in Pakistan

http://dx.doi.org/10.1016/S0956-053X(17)30666-9

Vol. 68 (I-II)

2017

4.67

 

109

Muhammad Abid, Hafiz Abdul Wajid, Muhammad Zohair Iqbal, Shayan Najam, Ali Arshad, Ammad Ahmad

IIUM Engineering Journal

2228-6187

Design and Analysis of an Aerodynamic Down force Package for a Formula Student Race Car

http://journals.iium.edu.my/ejournal/index.php/iiumej/author/submission/679

Vol. 18, No. 2, 2017, pp 212-224

2017

0.40

 

111

Muhammad Abid, Shehbaz Mehmood Khan, Hafiz Abdul Wajid

IIUM Engineering Journal

0256-2499

Optimization of box type girders with and without industrial constraints

Vol. 19, No. 1, 2018, pp 289-306

2018

0.40

 

112

Zaineb Abid, Muhammad Abid, Qudsia Zafar, Shahbaz Mahmood.

Earth Systems and Environment

2509-9426

and 2509-9434

Detrimental Effects of Climate Change on Women

http://link.springer.com/article/10.1007/s41748-018-0063-9

10.1007/s41748-018-0063-9

pp. 1-15

2018

--

 

113

Khan U, Yasin A, Abid M, Shafi I, Khan SA.

Journal of Medical Systems

0148-5598

A Methodological Review of 3D Reconstruction Techniques in Tomographic Imaging https://www.ncbi.nlm.nih.gov/pubmed/30178184

42(10):190. doi: 10.1007/s10916-018-1042-2. Pp 1-12

2018

2.098

 

114

Muhammad Abid, Saif Javed, Hafiz Abdul Wajid

International Journal of Pressure Vessels and Piping

0308-0161

Performance of a gasketed joint under bolt up and combined pressure, axial and thermal loading – FEA study

Vol. 168, pp. 166-173

2018

1.543

 

115

M. Abid, Z. Abid, J. Sagin, R. Murtaza, D. Sarbassov, M. Shabbir.

International Journal of Environmental Science and Technology.

1735-2630

Prospects of foating photovoltaic technology and its implementation
in Central and South Asian Countries

https://doi.org/10.1007/s13762-018-2080-5. 1-8

2018

2.037

 

116

Ayesha Sohail, Muhammad Younas, Yousaf Bhatti, Zhiwu Li, Sumeyye Tunc and Muhammad Abid

SAGE

 

Analysis of Trabecular Bone Mechanics Using Machine Learning 

https://journals.sagepub.com/doi/full/10.1177/1176934318825084

Volume 15: 1-7

2019

   

Dr Muhammad Abid Assistant Professor

S.#

Name of Author(s)

Complete Name of Journal

ISSN

Title of the Publication

Vol/ Page #

Year

IF

Citation as per Google Scholar

01

F. Mzali, V. Meier, M. Abid and U. Hammerschmidt

Special Topics &

Reviews in Porous Media‒An International Journal

2151-4798

Measurement of Temperature‒dependent Thermal Conductivity of Moist Bricks using the Transient Hot‒bridge Sensor.

 

1:87-94

2010

Nil

04

02

M. Abid

Pakistan Journal of Scientific and Industrial Research Series A, Physical

Sciences

2221-6413

Synthesis and Thermopower of Vanadium‒doped Bismuth‒based (Bi‒2223) High‒Tc

Superconductors

56:30‒33

2013

Nil

0

03

M. Abid, U. Hammerschmidt and Jürgen Köhler

International Journal of Thermal Sciences

1290-0729

Thermophysical Properties of a fluid‒saturated

sandstone

76:43‒50

2014

3.361

16

04

M. Abid, U. Hammerschmidt and Jürgen Köhler

International Journal of Thermal Sciences

1290-0729

Temperature and moisture dependent

thermophysical properties of Sander sandstone

86:88‒94

2014

3.361

07

05

Ulf Hammerschmidt and Muhammad Abid

International Journal of Thermal Sciences

1290-0729

The thermal conductivity of glass-sieves: I. Liquid

saturated frits

96:119-127

2015

3.361

03

06

Ulf Hammerschmidt and Muhammad Abid

International Journal of Thermal Sciences

1290-0729

Thermophysical properties of a single coffee bean, a

single peanut and an IC-Package

100: 20-28

2016

3.361

02

07

Muhammad Abid, Ragnar Somdalen and Marina Sancho Rodrigo

Journal of Electronic Materials

0361-5235

Design Optimization of a

Thermoelectric Cooling Module Using Finite Element Simulations

47: 4845-4854

2018

1.566

0

08

Hafiz Muhammad Ali, Hassan Ali, Muhammad Abubaker, Ahmed Saieed, William Pao, Majid

Ahmadlouydarab, Hasan Koten, Muhammad Abid

Thermal Science

0354-9836

Condensate Retention as a function of

condensate flow rate on Horizontal Enhanced PIN-FIN Tubes

Online-first Issue 0,

161-161

 

2018

1.43

0

09

I. Batool, G. Hussain, N. Kanwal and M. Abid

Journal of Injury Control and Safety Promotion, Taylor and Francis

1745-7300

Identifying the factors behind fatal and non-fatal

road accidents: A case study of Lahore Pakistan

25: 401-407

2018

0.995

02

10

Batool, I., Hussain, G., & Abid, M

Policy Perspective

1812-7347

Airport Privatization in Pakistan

15:157-177

2018

Nil

0

11

Ghulam Hussain, Irem Batool, Noreen Kanwal and Muhammad Abid

Transportation Research Part F: Traffic Psychology and Behaviour

1369-8478

The moderating effects of

work safety climate on socio cognitive factors and risky driving behavior of truck drivers in

Pakistan

62:700-715

2019

1.935

0

 

Dr Ali Usman Assistant Professor

S.#

Name of Author(s)

Complete Name of Journal

ISSN

Title of the Publication

Vol/ Page #

Year

IF

Citation as per Google Scholar

1.

Ali Usman,

Sadia Riaz,

Cheol Woo Park

Energies

1996-1073

Hydrodynamic Conjunction of Textured Journal Surface—Bearing for Improved Frictional Response during Warm-Up of an Internal Combustion Engine.

Vol. 11(12):3515

doi:10.3390/en11123515

2018-12-17

2.676

0

2.

Ali Usman,

Cheol Woo Park

Industrial Lubrication and Tribology

0036-8792

Numerical optimization of surface texture for improved tribological performance of journal bearing at varying operating conditions.

Vol. 70 

Issue: 9, 

pp.1608-1618,

2018

0.763

1

3.

Y. Hamid,

A. Usman,

S. Kamran Afaq,

C. W. Park

Tribology International

0301-679X

Numeric based Low Viscosity Adiabatic Thermo-tribological Performance Analysis of Piston-skirt Liner System Lubrication at High Engine Speed

Volume 126,

October 2018,

Pages 166-176,

2018

3.246

0

4.

Ali Usman,

Cheol Woo Park

Tribology International

0301-679X

Numerical investigation of tribological performance in mixed lubrication of textured piston ring-liner conjunction with a non-circular cylinder bore

Volume 105

Pages 148-157

 

2017

3.246

11

5.

Ali Usman,

Cheol Woo Park

International Journal of Engine Research

1468-0874 

Modeling and Simulation of Frictional Energy Loss in Mixed Lubrication of a Textured Piston Compression Ring during Warm-up of SI Engine

Volume: 18 issue: 4, page(s): 293-307

July 7, 2016

2.676

6

6.

Ali Usman,

Cheol Woo Park

Tribology International

0301-679X

Optimizing the tribological performance of textured piston ring–liner contact for reduced frictional losses in SI engine: Warm operating conditions

Volume 99

Pages 224-236

2016

3.246

22

7.

Ali Usman,

Cheol Woo Park

Energy Conversion and Management

0196-8904

Numerical investigation of frictional behavior and energy loss in mixed-hydrodynamic contact of piston ring pack with deformed cylinder liner during warm-up period of SI-engine

Volume 117

Pages 115-131

1 June 2016

5.589

7

8.

Ali Usman,

Cheol Woo Park

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

2041-305X

Mixed lubrication of piston compression ring with deformed cylinder liner during warm-up of spark ignition engine

Volume: 230 issue: 10, page(s): 1288-1309

February 24, 2016

1.318

7

9.

Ali Usman,

Cheol Woo Park

International Journal of Precision Engineering and Manufacturing-Green Technology

2288-6206

Transient lubrication of piston compression ring during cold start-up of SI engine

Volume 3, Issue 1, pp 81–90

23 January 2016

3.774

15

10.

Ali Usman, 

Taqi Ahmad Cheema, 

Cheol Woo Park

Proc IMechE Part J: J Engineering Tribology

2041-305X

Tribological performance evaluation and sensitivity analysis of piston ring lubricating film with deformed cylinder liner

Volume: 229 issue: 12, page(s): 1455-1468

April 13, 2015

1.318

16

 

Dr Shoaib Naseem Assistant Professor

 

S.#

Name of Author(s)

Complete Name of Journal

ISSN

Title of the Publication

Vol/ Page #

Year

IF

Citation as per Google Scholar

1

Jeongmoo HuhB.V.S. Jyoti, Yongtae Yun

M. N. Shoaib

SejinKwon

International Journal of Aerospace Engineering

1687-5974

Preliminary Assessment of Hydrogen Peroxide Gel as an Oxidizer in a Catalyst Ignited Hybrid Thruster

2018/14

2018

1.182

0

2

M.S.Naseem

B.V.S.Jyoti

S.W.Baek

Propellants, Explosives, Pyrotechnics

1521-4087

Effect of Alcohol Carbon Chain on Enthalpy and Delay Time of Gelled Hypergolic Propellant System

43/453–460

2018

1.908

1

3

M.S.Naseem B.V.S.JyotiS.

W.Baek, H.J.Lee, S.J.Cho,

Propellants, Explosives, Pyrotechnics

1521-4087

Hypergolic Studies of Ethanol Based Gelled Bi-Propellant System for Propulsion Application

Vol. 42, pp. 1-8,

2017

1.908

3

4

M.S.Naseem

B.V.S.Jyoti

S.W.Baek, H.J.Lee, and S.J.Cho,

Combustion and Flame

0010-2180

Hypergolicity and Ignition Delay Study of Gelled Ethanolamine Fuel

Vol. 183, pp. 102-112

2017

4.494

5

5

B.V.S.Jyoti, Muhammad Shoaib Naseem, S.W.Baek,

Combustion and Flame,

0010-2180

Hypergolicity and Ignition Delay Study of Pure and Energized Ethanol Gel Fuel with Hydrogen Peroxide

Vol. 176, pp. 318-325

2017.

4.494

10

6

SAROSH Ali, YUN-FENG Dong,

SHOAIB Muhammad,

Applied Mechanics and Materials

1662-7482

An Aero-thermodynamic and Mass Model Integrated Optimization Framework for Highly-Integrated Fore-body-Inlet Configurations

Vol. 245 pp 277-282

2013

0

2

A. INTERNATIONAL CONFERENCE PAPERS

Prof. Dr. Muhammad Abid

  1. D H Nash and M Abid, ‘Combined external load tests for standard and compact flanges’, 9th International Conf. on Pressure Vessel Tech., Sydney, Australia, April 9-14, 2000, pp.249-257.
  2. D H NASH, J Spence, A S Tooth, M Abid and D J Power, ‘A parametric study of metal-to-metal full face taper hub flanges’, 9th Intl. Conf. on Pressure Vessel Tech., Sydney, Australia, April 9-14, 2000, pp.383-391.
  3. M Abid, D H Nash and J Webjom, ‘The stamina of non-gasketed flanges’, Fatigue 2000, Cambridge, UK. April 2000. Engineering Materials Advisory Services (EMAS) UK. pp.575-584.
  4. M Abid, D H Nash and J Webjom, ‘On the Implementation of Novel Alternative Pipe Joint Technology’, ASME Pressure Vessel and Piping Conference, Seattle, USA. July 2000, pp.201-207.
  5. M Abid, D H Nash, ‘Emerging Technologies in Pipe Joints’, Intentional Pipeline Conference (IPC2000), Calgary Canada, October 2000, pp.523-528.
  6. Muhammad Abid, Hikmet Kocabas ‘Design Optimization of a Hydraulic Stud Tensioner’, 6th Biennial conference on Engineering Design and Analysis, Istanbul, Turkey, July 8~ 11, 2002. Proceedings of ESDA2002/DES-025, pp 1-9.
  7. M Abid, D H Nash, ‘Risk Assessment studies for Gasketed and Non-gasketed bolted pipe joints’, Intentional Pipeline Conference (IPC2002), Calgary Canada, Sep 29 ~ Oct 3 2002. Proceedings of IPC2002/IPC-27386, pp 1-11.
  8. M Abid, ‘Experimental setup for the determination of a bolted pipe joint’s capacity subjected to combined loading’, 4th Middle East Refining and Petrochemicals Conference and Exhibition, Bahrain (Petrotech2003), Sep 29th to Oct 1st 2003, pp. 1 to 13.
  9. Siddique, M. Abid, H. F. Junejo, ‘3-D Finite Element Simulation of a single pass butt-welded pipe-flange joint’, 2nd International Mechanical Engineering Congress (SIMEC 2003), Karachi, Pakistan, Sep 26th ~ 28th 2003, pp.1 to 12.
  10. M Abid, D H Nash, ‘Stress variation in flange of a non-gasketed flanged bolted joint during bolt up and operating conditions’ Advanced Engineering Design AED2004, Glasgow, UK. Sept. 5-8, 2004, pp. 1-7.
  11. Siddique, M. Abid, H. F. Junejo, R. A. Mufti, “Three dimensional finite element simulation of welding residual stresses in pipe-flange joints: effect of welding parameters”, 7th Intl. Conference on Residual Stresses in China, June 14-17, 2004, pp. 1-8.
  12. Siddique, M. Abid and R. A. Mufti., “Simulation of welding distortions and Residual Stresses in pipe-flange joint using finite element Technique: Comparison of 2D and 3D models”, International Mechanical Engineering Conference (IMEC2004), December 5-8, 2004, Kuwait, pp. 674-691.
  13. Muhammad Abid, “Comparative Modal Analysis of Gasketed and Non-Gasketed Bolted Flange Joints”, Computer Aided Design and Manufacturing: A Global Perspective (CCADM2005), April 8-9, 2005, Patiala, India. pp. 1-12.
  14. Muhammad Abid and Khurshid Alam, ‘Design and analysis of push pipe joint under internal pressure and temperature loading’. International Seminar on Advanced Materials (ISAM-2005), 19~22 September 2005, Islamabad, Pakistan. pp. 588-598.
  15. Muhammad Abid, Muhammad Siddique, ‘A Study of Welding Deformations and Residual Stresses in a Pipe-Flange Joint: Effect of Constraints’. Tehran International Congress on Manufacturing Engineering (TICME2005) December 12-15, 2005, Tehran, Iran. 1-8.
  16. Muhammad Abid, A. Chattha, ‘Environmental problems of paint sector in Pakistan and their assessment’ R'057th World Congress on Recovery, Recycling and Re-integration. September 25-29, 2005, Beijing, China. pp. 1-7.
  17. A. Chattha and Muhammad Abid, ‘Environmental changes in the Automotive Industry of Pakistan and process remedies’. R'057th World Congress on Recovery, Recycling and Re-integration. September 25-29, 2005, Beijing, China. pp. 22-29.
  18. G. Bannikov, M. Abid, Abdus Salam, ‘Finite element analysis of a crankshaft of a diesel engine’. International Seminar on Advanced Materials (ISAM-2005), 19~22 September 2005, Islamabad, Pakistan. pp. 529-534.
  19. Abid, M.G. Bannikov, Himmat Ali, ‘3-d steady state thermo-mechanical analysis of a piston of a direct injection diesel engine’. International Seminar on Advanced Materials (ISAM-2005), 19~22 September 2005, Islamabad, Pakistan. pp. 542-547.
  20. Abid, ‘Measurement of welding deformation in a non-gasketed pipe-flange joint’, IIW International Congress: Welding and Related Inspection Technologies: 8 – 10 March 2006, Stellenbosch, South Africa. pp. 1-9.
  21. Abid, Javed A. Chattha, Kamran A. Khan, ‘Temperature distribution behavior in a bolted flange joint under steady state and transient thermal loading: an analytical approach’, 3rd International Mechanical Engineering Congress: Karachi, Pakistan, 20-21st March 2006. pp. 1-11.
  22. Abid, D. H. Nash, ‘Bolt bending behaviour in a bolted flanged pipe joint: A comparative study’, 2006 ASME Pressure Vessel and Piping Conference, Hyatt Regency Vancouver, Vancouver, British Columbia, Canada, July 23-27, 2006. pp. 1-8.
  23. Abid, D.H.Nash, “Joint relaxation behaviour of gasketed bolted flanged pipe joint during joint assembly”, 2nd WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS'06) TTVenice, Italy, November 20-22, 2006. pp. 319-325.
  24. Muhammad Abid, “Design and Analysis of Non-Gasketed Bolted Flanged Pipe Joint Under Combined Internal Pressure and Temperature Loading”, Proceedings of 3rd BSME-ASME International Conference on Thermal Engineering, Dhaka, Bangladesh. 20-22 December, 2006. pp. 1-7.
  25. Muhammad Abid and Abdul Waheed Awan, ‘3-D non-linear finite element analysis of a non-gasketed flange joint under combined internal pressure and axial loading’, ASME PVP 2007 / CREEP 8 CONFERENCE Hyatt Regency San Antonio, San Antonio, Texas, United States, July 22-26, 2007. pp 1-8.
  26. Muhammad Abid, Javed A. Chattha, Kamran Khan, ‘Finite element analysis of a gasketed flange joint under combined internal pressure and thermal transient loading’, ASME PVP 2007 / CREEP 8 CONFERENCE Hyatt Regency San Antonio, San Antonio, Texas, United States, July 22-26, 2007. pp 1-7.
  27. Muhammad Abid and Saad Hussain, ‘Bolted Joint’s Relaxation Behavior: A FEA Study’, Failure of Engineering Materials and Structures, FEMS, UET Taxila, Pakistan, 22-23 October 2007. pp. 143-153.
  28. Muhammad Abid, Sajid Iqbal, Shahab Khushnood, ‘Nonlinear Finite Element Analysis of Gasketed Flange Joints under Combined Internal Pressure and Different Thermal Loading Conditions’, Failure of Engineering Materials and Structures, FEMS, UET Taxila, Pakistan, 22-23 October 2007. pp 217-228.
  29. Abid, Ahsan Rauf, Shahab Khushnood, ‘Non-Linear Finite Element Analysis of Non-Gasketed Flange Joint under Combined Internal Pressure and Different Thermal Loading Conditions’, Failure of Engineering Materials and Structures, FEMS, UET Taxila, Pakistan, 22-23 October 2007. pp 229-236.
  30. Abid, K. A. Khan, J. A. Chattha, ‘Performance of a flange joint using different gaskets under combined internal pressure and thermal loading’. International conference on advanced design and manufacturing (ICADAM2008), 14-16 January 2008, Haiksou China. pp 855-864.
  31. Muhammad Abid and Saad Hussain, ‘Gasketed joint’s relaxation behavior during assembly using different gaskets: A comparative study’. International conference on advanced design and manufacturing (ICADAM2008), 14-16 January 2008, Haiksou China. pp 91-100.
  32. Muhammad Abid, Muhammad Hammad Akmal, Shahid Parvez, ‘Optimization of box type girder of overhead crane’. Accepted for presentation and publication in International conference on advanced design and manufacturing (ICADAM2008), 14-16 January 2008, Haiksou China. pp 609-618.
  33. Ahmed, M. Abid, A.V. Mitrofanov, V.V.Silberschmidt, ‘Ultrasonically assisted turning: Finite element model’, Failure of Engineering Materials and Structures, FEMS, UET Taxila, Pakistan, 22-23 October 2007. pp. 237-248.
  34. S. Karimov, Muhammad Abid, M.I.Fedorovc I. Qazi, Z.M.Karieva, I.Murtaza, ‘Organic Semiconductor Sensor for Measurement of Humidity and Ammonia Concentration’ 1st National conf on significance of WTO regime for chemical related industries. March 15, 2008, Lahore, Pakistan. pp. 69-75.
  35. Abid, ‘Effect of bolt scatter on different sizes of gasketed bolted flange joints: A comparative FE study’. 13th International conference on Applied Mechanics and Mechanical Engineering (AMME-13), May 27-29, 2008, Cairo, Egypt. pp 74-83.
  36. Khasan Karimov, Muhammad Abid, ‘Biogas digester with built-in solar collector’, Accepted for presentation and publication in REWAS2008 October 12-15, 2008, Hilton Cancun Golf & Spa Resort, Cancun, Mexico. pp. 1803-1808.
  37. Muhammad Abid, ‘Importance of proper bolt surface treatment for better bolted joint’s performance’, Conference in Tajikistan. (2008). pp 70-78.
  38. Muhammad Abid, Arif Masud, Ashfaq Khokhar, Development of Computational Mechanics Infrastructure and Human Resources for Advancing Engineering Design Practices in Pakistani Industry’ International conference on Pakistan-US Science and Technology, August 26-28, 2008, Islamabad, Pakistan. pp. 1-18.
  39. Muhammad Abid, Sattar Ullah, Effect of different welding and geometric parameters on residual stresses and deformations in welded pipe-flange joints. 3rd National Seminar on Welding Science and Technology, July 27-29, 2009, Islamabad Pakistan. pp. 1-8.
  40. Muhammad Abid, Sattar Ullah, Finite Element Investigation of Residual Stresses and Distortion in Welded Pipe-Flange Joint of Different Classes. 3rd National Seminar on Welding Science and Technology, July 27-29, 2009, Islamabad Pakistan. pp. 1-8.
  41. Muhammad Abid, Muhammad Jawad Qarni, 3D Thermo-Mechanical Finite Element Analysis of Residual Stresses and Distortions due to Multi-pass Welding in Pipe Flange Joints. 3rd National Seminar on Welding Science and Technology, July 27-29, 2009, Islamabad Pakistan. pp. 1-9.
  42. Muhammad Abid, Ali Waqas, Finite Element Analysis of Welded Locomotive Bogie Frame. 3rd National Seminar on Welding Science and Technology, July 27-29, 2009, Islamabad Pakistan. pp. 1-19.
  43. S. Karimov, Muhammad Abid, Biogas digester with built-in solar reverse absorber heater. Submitted for R'09 Twin World Congress, Resource Management and Technology for Material and Energy Efficiency, Nagoya /Japan and Davos / Switzerland, September 14–16, 2009.
  44. Masroor Hussain, Mushtaq Ahmad, Muhammad Abid, Arif Masud, Ashfaq Khokhar. Implementation of 2D Parallel ALE Mesh Generation Technique in FSI problems using OpenMP. FIT’09, December 16–18, 2009, CIIT, Abbottabad, Pakistan. pp. 1-8.
  45. Shuja Khan, Shafaat A. Bazaz and Muhammad Abid, “Comparative Study on System Model and Finite Element Analysis of a Monolithic 3DOF MEMS Capacitive Accelerometer”, International Conference on Semi-Conductor Technology, ISBN 978-1-4244-5383-2, December 18-19, 2009 Jeju Island, South Korea. pp. 1-7.
  46. Abid, Kh. S. Karimov, F. Iqbal, F. Qureshi. Design, Fabrication and Testing of Wind Solar System. DICE2009, 23-24th December 2009, CIIT Lahore, Pakistan. pp. 1-8.
  47. Abid, J. A. Chattha, Kh. S. Karimov, A. Saleem, B. A. Rafique, M. A. Maqbool, M. Aamir. Design, Fabrication and Testing of Biogas digester with reverse absorber heater. DICE2009, 23-24th December 2009, CIIT Lahore, Pakistan. pp. 1-11.
  48. Abid, M. A. A. Noon, A. Sarwar, A. Danial. Modeling and simulation of turbulent flows through Tarbela Tunnels 1 and 3. DICE2009, 23-24th December 2009, CIIT Lahore, Pakistan. pp. 1-15.
  49. Abid, M. A. A. Noon, A M. Haider, T. M. Chaudhry. Modeling and simulation of turbulent flows through Tarbela Tunnels 4 and 5. DICE2009, 23-24th December 2009, CIIT Lahore, Pakistan. pp. 1-15.
  50. Abid, M. A. A. Noon. Turbulant flow simulations through Tarbela tunnels considering the effect of sediment particles. DICE2009, 23-24th December 2009, CIIT Lahore, Pakistan. pp. 1-33.
  51. Abid, M. R. Siddiqui. Water flow simulation and analysis of Tarbela Dam reservoir through spillways. DICE2009, 23-24th December 2009, CIIT Lahore, Pakistan. pp. 1-41.
  52. Shuja Khan, Abid Iqbal, Shafaat A. Bazaz and Muhammad Abid, “System & Finite Element Modeling of PolyMUMPs Based Monolithic 3D MEMS Capacitive Accelerometer”, the 5th IEEE Int. Conf. on Nano/Micro Engineered and Molecular Systems, January 20-23, 2010 Xiemen, China. pp. 1-6.
  53. Abid, Research in the area of bolted flanged pipe joints. 1st Pipeline, Piping and Integrity Management Conference PPIMC2010, 2nd March 2010. Karachi, Pakistan. Pp. 1-10.
  54. Muhammad Abid, Niaz Bahadur Khan. Stamina of a gasketed flange joint under combined internal pressure and axial loading. 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA). July 12-14, 2010, Yeditepe University, Istanbul. pp. 1-8.
  55. Muhammad Abid, Adnan Aslam Noon. Turbulent flow simulations through Tarbela dam tunnels considering the effect of sediment particles. 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA). July 12-14, 2010, Yeditepe University, Istanbul. pp. 1-6.
  56. Muhammad Abid, Muftooh ur Rehman Siddiqui. Modeling of Tarbela reservoir and water flow simulation through its spillways. 10th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA). July 12-14, 2010, Yeditepe University, Istanbul. pp. 1-8.
  57. Muhammad Abid, Shaid Khalil, Khalid A Butt, Umer Samie, M. Soban. Stamina of a gasketed bolted flanged pipe joint under bolt up and combined pressure plus axial plus thermal loading – FEA study. Submitted to fifteenth international cultural and academic meeting of Engineering students ICAMES2010, May 09 – 16, 2010. pp. 1-11.
  58. .S. Karimov, J.A.Chattha, M. Abid, A.Saleem, B.A.Rafique, M.A.Maqbool, M.Aamir. Solar biogas digester with built-in reverse absorber heater. POGEE Conference 2010, Karachi, Pakistan. pp. 1-11.
  59. S. Karimov, Muhammad Abid, A.Iftikhar, H. Safeer. Investigation of a simple combined pv-thermal collector system with built-in storage water heater. International conference "Application of renewable energy sources in central Asia", Dushanbe, Tajikistan, Sep.28-30, 2009. pp. 1-5.
  60. Muhammad Abid, Adnan Aslam Noon. Study of the effect of sediment flows through tarbela dam tunnel 3. ISFCS2010 Islamabad Pakistan. pp. 1-16.
  61. Muhammad Abid, ‘Application of Computational Mechanics in the area of bolted flanged pipe joints for their performance optimization during manufacturing, assembly and operating conditions’. ISFCS2010 Islamabad Pakistan. pp. 1-16.
  62. Masroor Hussain, Muhammad Abid, Mushtaq Ahmed, Ashfaq khokhar, Arif Masud, ‘Parallel computation of ale mesh Generation for distributed memory Systems using MPI. ISFCS2010 Islamabad Pakistan. pp. 1-15.
  63. Muhammad Abid, Muftooh ur Rehman Siddiqui, ‘Water and Sediment Flow Simulation in Tarbela Dam Reservoir’. ISFCS2010 Islamabad Pakistan. pp. 1-17.
  64. S. Karimov, M.Abid, Z.M. Karieva, Adam Khan. Resistance, Capacitance and Field Effect Transistor Based Organic Pressure Transducers. NanoSmat 2010. France. pp. 1-10.
  65. M.Akhmedov, G.N.Petrov, Kh.S.Karimov, Muhammad Abid. Hydropower Resources and Potentialities of Micro and Small Power Plants Utilization in Tajikistan and Pakistan. 14-15 October 2010. Islamabad, Pakistan. pp. 1-9.
  66. Muhammad Abid, Yasir Khan. Assembly of gasketed bolted flange joints using torque control of preload method: FEA approach. Seventh Jordanian International Mechanical Engineering Conference (JIMEC'7), 27-29 September 2010, Jordan. pp. 1-14.
  67. Abid, D. H. Nash, S. Parvez, H. Fawad. Simulation of stationary GTAW process using argon as shielding gas: Effect of electrode angle and tip angles in butt welding. International Bhurban Conference on Applied Science and Technology (IBCAST), 10-13 January 2011. Islamabad, Pakistan. pp. 1-13.
  68. Parvez, M. Abid, H. Fawad, D. H. Nash. The effect of electrode tip angle on arc and anode temperature in GTAW. Seventh Jordanian International Mechanical Engineering Conference (JIMEC'7), 27-29 September 2010, Jordan. pp. 1-10.
  69. Khasan S. Karimov, Muhammad Abid. Combined uncovered sheet-and-tube pvt-collector system with built-in storage water heater. The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7). 27 - 29 September 2010, Amman – Jordan. pp. 1-6.
  70. S. Karimov, Z.M.Karieva, M. Abid. Organic materials sensors for environmental monitoring and assessment. Environmental Science and Information Application Technology conference (ESIAT 2010). Wuhan, China, July 17-18, 2010. pp. 1-3.
  71. Abid, A. Ahmad, H. A. Khan, R. Saleem. Design, Analysis and Prototyping of a Hydraulic Ram Pump. International Conference on Power Generation Systems and Renewable Energy. Technologies November 29 to December 2, 2010, Islamabad Pakistan. pp. 1-7.
  72. S.Karimov, Kh.M.Akhmedov, Muhammad Abid, G.N.Petrov. Combined wind, hydropower and photovoltaic systems for generation of electric power and control of water resources International Conference on Power Generation Systems and Renewable Energy Technologies Nov 29 to Dec 2, 2010, Islamabad Pakistan. pp. 1-8.
  73. Abid, D. H. Nash, S. Parvez, H. Fawad. Simulation of Stationary Gtaw Process using Argon as Shielding Gas: Effect of Electrode Angle and Tip Angles in Butt Welding. 8th Intl Bhurban conf on Applied Sciences and Technology, IBCAST 2011, Islamabad Pakistan. pp. 1-12.
  74. Abid. Research in the area of Bolted Flanged Pipe Joints. 2nd Pipeline and Piping Integrity Management Conference, February 10, 2011, Lahore, Pakistan. pp. 1-12.
  75. Abid, M. N. Manzoor, K. Ahmed, A. Hussain. Analysis of Non-gasketed bolted flanged pipe joints under dynamic loading. 2nd Pipeline and Piping Integrity Management Conference, February 10, 2011, Lahore, Pakistan. pp. 1-8.
  76. Abid, A. R. Shah. Analysis of gasketed bolted flanged pipe joints under dynamic loading. 2nd Pipeline and Piping Integrity Management Conference, February 10, 2011, Lahore, Pakistan. pp. 1-10.
  77. Muhammad Abid, Kamran Ahmed Khan and Javed Ahmad Chattha. Leakage Analysis of Gasketed Flange Joints under Combined Internal Pressure and Thermal Loading. ASME PVP USA.
  78. S.Karimov, Kh.M.Akhmedov, Muhammad Abid, G.N.Petrov, On Utilization of Water Resources in Central Asia, World Resources Forum (WRF-2011), 19-21 S. Deptember, Davos, Switzerland, Book of Abstracts (2011), pp. 8-9.
  79. Muhammad Abid, Atta ur Rehman Shah. Harmonic And Transient Analysis Using Ansys Software – Limitations And Issues. International Conference on Advanced Modeling and Simulation. ICAMS2011, November 28th-30th, 2011, Islamabad Pakistan. pp. 1-10.
  80. Parvez, M. Abid and D. Nash. Experimental and numerical investigation of electrode tip angles in stationary GTAW. International Conference on Advanced Modeling and Simulation. ICAMS2011, November 28th-30th, 2011, Islamabad Pakistan. pp. 1-11.
  81. Abid, Kh. S. Karimov, M. Rehman, M. A. Asad, A. M. Qaisrani, K. Mahmood, M. S. Z. Malik. Numerical and experimental analysis of a spiral horizontal axis wind turbine. Proceedings of International conference on "Renewable Energy Sources", May, 24-26, 2011, Khujand , Tajikistan, pp.42-50.
  82. S. Karimov, M.Abid, A.Javed, A.Khan, F.T.Ikram, I.Rehman. Design, Construction and Demonstration of a Modular Type Vertical Axis Wind Turbine. Proceedings of International conference on "Renewable Energy Sources", May, 24-26, 2011, Khujand , Tajikistan, pp. 163-169.
  83. Abid, S. Parvez, D. H. Nash. Effect of different electrode tip angles with tilted torch in stationary gas tungsten arc welding: A 3D simulation. International Conference on Pressure Vessel Technology (ICPVT-13) 21-23 May 2012, London, UK. Pp. 1-16.
  84. Kamran Ahmed Khan, Muhammad Abid, Javed Ahmad Chattha. Performance of a flange joint using different gaskets under combined internal pressure and thermal transient loading. International Conference on Pressure Vessel Technology (ICPVT-13) 21-23 May 2012, London, UK. Pp. 1-18.
  85. Muhammad Abid, David Hugh Nash, Saif Javed, Syed Taha Hassan Rizvi. 3-D Nonlinear FEA of a gasketed flange joint under bolt up and combined internal pressure, temperature, axial and bending loading. International Conference on Pressure Vessel Technology (ICPVT-13) 21-23 May 2012, London, UK. Pp. 1-13.
  86. Muhammad Abid, Atta ur Rehman Shah, David Hugh Nash. Performance of a gasketed bolted pipe flanged joint under bolt up, internal pressure and harmonic axial loading. International Conference on Pressure Vessel Technology (ICPVT-13) 21-23 May 2012, London, UK. Pp. 1-7.
  87. Masroor Hussain, Muhammad Abid, Mushtaq Ahmad. Stabilized Mixed Finite Elements for Darcy’s Law on Distributed Memory Systems. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29, 2012. Islamabad, Pakistan. Pp. 39-47.
  88. Shahid Pervez, Muhammad Abid. A Numerical Model to Investigate the Gas Tungsten Arc Welding Process. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29. Islamabad, Pakistan. Pp. 60-73.
  89. Muhammad Abid, Jamal Saeed. Sediment and Cavitation Erosion Studies through Tarbela Dam Tunnel 2 and 3. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29, 2012. Islamabad, Pakistan. Pp. 140-149.
  90. Muhammad Abid, Atta-Ur-Rehman Shah. Comparison of the Behavior of a 3d Gasketed Bolted Pipe Flanged Joint under Static and Dynamic Conditions. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29, 2012. Islamabad, Pakistan. Pp. 205-215.
  91. Muhammad Abid, Niaz Bahadur Khan. Stamina of a Gasketed Flange Joint Under Combined Internal Pressure and Bending Loading. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29, 2012. Islamabad, Pakistan. Pp. 229-238.
  92. Muhammad Abid, Salman Shahid, Hamza Rizwan, Hamayun Sattar, Umar Abid. Modeling of Tarbela Dam Tunnel 4 and Turbulent Flow Analysis to Study Sediment and Cavitations Erosion Effects. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29, 2012. Islamabad, Pakistan. Pp. 364-369.
  93. Muhammad Abid. Application of Computational Mechanics in the Area of Bolted Flanged Pipe Joints for their Performance Optimization during Manufacturing, Assembly and Operating Conditions. 2nd International Symposium on Frontiers of Computational Sciences (ISFCS2012) June 28-29, 2012. Islamabad, Pakistan. Pp. 370-385.
  94. Muhammad Abid and Jamal Saeed. Effect of increased sediment flow rate in Tarbela Dam Tunnel 2 on water and sediment velocity under varying head condition. International Symposium on Renewable Energy and Energy Saving Technologies, Khujand, Tajikistan. May 17-19, 2012. Pp. 236-242.
  95. Abid, Kh..S. Karimov, A.R.Ali, H.A.B.Shahid, M.Bilal, S.M.H.Mahmood. Micro-Hydropower Plant on Catamaran for Free Water Flow Operation. International Symposium on Renewable Energy and Energy Saving Technologies, Khujand, Tajikistan. May 17-19, 2012. Pp. 242-247.
  96. Muhammad Abid, Tariq Saeed Khan, Asfand Yar, Hafiz Umer Farooq, M. Khurram Toor, Taha Iqbal. . Analysis, Assessment and Proposal for GIKI HVAC Heating Network. International Symposium on Renewable Energy and Energy Saving Technologies, Khujand, Tajikistan. May 17-19, 2012. Pp.248-253.
  97. Muhammad Abid, Salman Shahid, Hamza Rizwan, Hamayun Sattar, Umar Abid. Modeling of Tarbela dam tunnel 4 and turbulent flow analysis to study sediment and cavitations erosion effects. International Symposium on Renewable Energy and Energy Saving Technologies, Khujand, Tajikistan. May 17-19, 2012. Pp. 254-261.
  98. S. Karimov, Muhammad Abid. Combined PV-Thermal Collector System, Solar Biogas Digester and Battery-Based Micro-Hydropower Plant for Free Water Flow Operation Design. International Conference on Industrial Engineering and Operations Management. Istanbul, Turkey, July 3 – 6, 2012. Pp. 317-325.
  99. R. Shah, M. Abid, and JI Song, "Performance of a gasketed bolted pipe flanged joint under bolt up, internal pressure and harmonic bending loading". Proceeding of the KSMPE Autumn Conference 2012, South Korea, 2012, p.145.
  100. Muhammad Abid, Ayesha Khan, Shahab U. Ansari. Selection of optimum girders (rolled section) for overhead cranes using finite element analysis. 9th International Conference on Fracture & Strength of Solids June 9-13, 2013, Jeju, Korea. Pp. 1-5.
  101. Muhammad Abid, Mujahid Naseem. Optimization of different truss geometries using finite element analysis. 9th International Conference on Fracture & Strength of Solids June 9-13, 2013, Jeju, Korea. Pp. 1-6.
  102. Muhammad Abid, Shahbaz Mahmood Khan. Optimization of Box Type Girder of Overhead Crane for Different Capacities with Fixed Span. 9th International Conference on Fracture & Strength of Solids June 9-13, 2013, Jeju, Korea. Pp. 1-6.
  103. Muhammad Abid, Ahmad Abbas, Atta-ur-Rehman, Yasir Mehmood. A Comparative study between ASME and industrial strategy for gasketed bolted flange joints using torque control method: FEA Approach. 9th International Conference on Fracture & Strength of Solids June 9-13, 2013, Jeju, Korea. Pp. 1-5.
  104. Muhammad Abid, Yasir Mehmood Khan, David H Nash. Assembly of Gasketed Bolted Flange Joints Using Torque Control of Preload Method: FEA Approach. Proceedings of the ASME 2013 Pressure Vessels & Piping Division Conference PVP2013, July 14-18, 2013, Paris, France.
  105. Muhammad Abid. Applications of Non-gasketed Bolted Flange Joints in Aerospace Applications. ICASE2013 August 21-23, 2013 IST Islamabad Pakistan.
  106. Muhammad Abid. An overview of the progress in the flange design using FEA according to the European Norms (BS, EN, etc.) and ASME. 2nd conference on PED requirements and ASME Code. 14-15th Nov 2013 Genoa Italy.
  107. Muhammad Abid. Flange design by analysis. An overview of the progress in the flange design using FEA according to the European Norms (BS, EN, etc.) and ASME. ASME Special Seminar 19th Nov 2013 Istanbul Turkey.
  108. Muhammad Abid. Finite Element Analysis of Assembly Process for Gasketed Bolted Flange Joint. ASME Special Seminar 19th Nov 2013 Istanbul Turkey.
  109. Muhammad Abid. Experimental and Finite Element Investigation of Residual Stresses and Distortions in Welded Pipe-Flange Joints. ASME Special Seminar 19th Nov 2013 Istanbul Turkey.
  110. Muhammad Abid and Shahbaz M Khan. Optimization of Box Type Girder of Overhead Crane for Different Spans with Fixed Capacity Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, Bali, Indonesia, January 7 – 9, 2014.

 

Dr. Ali Usman

  1. Usman and C. W. Park, "Hydrodynamic Conjunction of Textured Journal Surface –Bearing for Improved Frictional Response during Warm-up of Internal Combustion Engine," in the 6th Asia International Conference on Tribology ASIATRIB2018, Sarawak - Malaysia, 2018. (accepted)
  2. Usman and C. W. Park, "Numerical Study of Surface Modification-based Improved Tribological Performance of Plain Bearing" in the 2nd International Conference on Tribology TURKEYTRIB’18, 18 – 20 April 2018, Taksim Istanbul-Turkey, 2018.
  3. Hamid, A. Usman, I. Ghumman, and S. K. Afaq, "Numerical Investigation of Thermo-Tribological Performance of Piston Skirt–Liner Interface for a Coupled Effect of Connecting Rod Inertia with Adiabatic Shear Heating," in the 6th Asia International Conference on Tribology ASIATRIB2018, Sarawak - Malaysia, 2018. (accepted)
  4. Hamid, A. Usman, I. Ghumman, and S. K. Afaq, "Numerical Investigation Of Adiabatic Thermo-Tribological Performance Of Piston Skirt–Liner Lubrication At High Engine Speeds," in the 2nd International Conference on Tribology TURKEYTRIB’18, 18 – 20 April 2018, Taksim Istanbul-Turkey, 2018.
  5. Usman A, Park CW. Optimization of surface texture for improved piston ring lubrication. Proceedings of the KSV International Conference Spring-2016. Daegu, South Korea. 2016.
  6. Usman A, Cheema TA, Kwak MK, Lee CY, Kim GM, Park CW. Effect of cylinder liner deformation on piston ring lubrication. Proceedings of the International Conference of Manufacturing Technology Engineers (ICMTE). Jeju, South Korea. 2014. p. 184.
  7. Malik MA, Qasim SA, Usman A, Mufti RA. Two-Dimensional Elastohydrodynamic Lubrication Fluid Flow Modeling of Piston Top Ring Considering Elastic Deformation in Initial Engine Start Up. ASME 2010 International Mechanical Engineering Congress and Exposition. Vancouver, Canada: ASME; 2010. p. 119-27.
  8. Malik MA, Usman A, Qasim SA, Mufti RA. Modeling of Piston Top Ring Lubrication by considering Cylinder Out-of-Roundness in Initial Engine Start up. The World Congress on Engineering. London, U.K. 2010. p. 1331-6.
  9. Usman A, Qasim SA, Mufti RA, Malik MA. Modeling the Energy Loss in the Two-Dimensional Lubrication of First Compression Ring in the Initial Engine Start-Up. IEEE International Conference on Energy Systems Engineering Islamabad, Pakistan 2010.

Dr. Shoaib Naseem

  1. V.S.Jyoti1*, Muhammad Shoaib Naseem1, Dong Gi Lee2, Seung Wook Baek* “Green Gel
    Hypergolic Propulsion System for Space Application”, International Conference of Mechanical and Aerospace Engineering (ICMAE-2017), Pune, India, August 2017.
  2. S.Naseem, B.V.S.Jyoti, and S.W.Baek "Experimental Studies of Gel Fuel for Propulsion
    System",The 2016 Asia-Pacific International Symposium on Aerospace Technology (APISAT- 2016), Toyama, Japan, October, 25-27, 2016.
  3. V.S.Jyoti, S.M.Kim, M.S.Naseem, S.W.Baek, Y.C.Ghim, and Dimitrios.C.Kyritsis "Effect of
    Electrostatic Voltage on Combustion of Propane Diffusion Flame", International Conference on Engineering, Technology, and Applied Science-Fall (ICTEA 2016 Fall), Seoul, South Korea, November 7-9, 2016.
  4. SAROSH Ali, YUN-FENG Dong, SHOAIB Muhammad, “An Aerothermodynamic and MassModel Integrated Optimization Framework for Highly-Integrated Forebody-Inlet
    Configurations” Applied Mechanics and Materials Vol. 245 pp 277-282, 2013. DOI: 10.4028/www.scientific.net/AMM.245.277

B. PUBLICATION IN TRADE JOURNALS

  1. Webjorn J, Abid M, “A modern, alternate pipe joint”, Published in Valve World Magazine, Volume 7, Issue 1, February 2002.

C. TECHNICAL REPORTS

  1. Abid, M and Nash, D H, ‘An experimental and analytical study of conventional (ANSI) and compact flange (VERAX) subjected to different singly and combined loading’, Report submitted to Shell UK Limited. 1998.
  2. Abid, M and Nash, D H, ‘An experimental and analytical study of conventional (ANSI) and compact flange (VERAX) subjected to different singly and combined loading’, Report submitted to European Pressure Equipment Research Council (EPERC). 1999.
  3. Abid, M and Nash, D H, ‘Review and Update Bolt Tension Values for ANSI Flange Joints in ES/090’, Report submitted to Shell Expro UK Ltd. December 2000.
  4. Abid, M, ‘Deformation of metal-to-metal flange surfaces during manufacturing’, Report submitted to VERAX Ltd. Sweden 2000.
  5. Abid, M and Nash, D H, ‘Review and Update Bolt Tension Values for ANSI Flange Joints in ES/090’, Report submitted to Shell Expro UK Ltd. September 2001. Final report with additional work.
  6. Muhammad Abid, 3-D Linear and Nonlinear Finite Element Analysis of Non-Gasketed Flange Joints under Bolt Up and Internal Pressure Loading. (Report No. R&D/F-GIK/ENGG (76)/SA-04/01). Report submitted to Pakistan Science Foundation in 2004.
  7. Muhammad Abid, 3-D Nonlinear Finite Element Analysis of Gasketed Flange Joint under Combined Internal Pressure and Different Temperatures. (Report No. R&D/F-GIK/ENGG (76)/A-05/02). Report submitted to Pakistan Science Foundation in 2005.
  8. Muhammad Abid, Design, Analysis, fabrication and Testing of Push Pipe Joints under internal pressure and temperature loading. (Report No. GIKI-251104/05/01). Report submitted to Pakistan Science Foundation in 2005.
  9. Muhammad Abid, 3-D Non-linear finite element analysis of a non-gasketed flange joint under combined internal pressure and temperature loading to determine their safe operating conditions. (Report # : R&D/F-GIK/ENGG (76)/SA-06/01/P1). Report submitted to Pakistan Science Foundation in 2006.
  10. Muhammad Abid, Analytical and experimental analysis of a non-gasketed flange joint under combined internal pressure and axial loading (Report #: R&D/F-GIK/ENGG (76)/SA-06/01/P2). Report submitted to Pakistan Science Foundation in 2006.
  11. Muhammad Abid, Design and Analysis of Non-Gasketed Bolted Flanged Pipe Joint Under Combined Internal Pressure and Temperature Loading (Outer Pipe Joint). (Report #: GIKI-PAEC-251104/06/02). Report submitted to Pakistan Science Foundation in 2006.
  12. Muhammad Abid, Design and Analysis of Non-Gasketed Bolted Flanged Pipe Joint Under Combined Internal Pressure and Temperature Loading (Outer Pipe Joint). (Report #: GIKI-PAEC-2505/07/01). Report submitted to Pakistan Science Foundation in 2007.
  13. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-I report 2006 submitted to EU.
  14. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-II report 2006 submitted to EU.
  15. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-III report 2006 submitted to EU.
  16. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Annual Technical and Financial Report (Year 1) 2006 submitted to EU.
  17. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-IV report 2007 submitted to EU.
  18. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-V report 2007 submitted to EU.
  19. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-VI report 2007 submitted to EU.
  20. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Mid Term report 2007 submitted to EU.
  21. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-VII report 2007 submitted to EU.
  22. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Annual Technical and Financial Report (Year 2) 2007 submitted to EU.
  23. Muhammad Abid, Development of computational mechanics infrastructure and human resources for advancing engineering design practices in Pakistani industry. 6 months 2006 submitted to HEC and USAID.
  24. Muhammad Abid, Development of computational mechanics infrastructure and human resources for advancing engineering design practices in Pakistani industry. Annual Report Technical and Financial (Year-1) 2006 submitted to HEC and USAID.
  25. Muhammad Abid, Development of computational mechanics infrastructure and human resources for advancing engineering design practices in Pakistani industry. Mid term report 2007 submitted to HEC and USAID.
  26. Muhammad Abid, Development of computational mechanics infrastructure and human resources for advancing engineering design practices in Pakistani industry. Annual Report Technical and Financial (Year-2) 2007 submitted to HEC and USAID.
  27. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-VIII report 2008 submitted to EU.
  28. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-IX report 2008 submitted to EU.
  29. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Quarter-IX report 2007 submitted to EU.
  30. Muhammad Abid, A frame work approach to strengthening Asian higher education in Advance Design and Manufacture. Annual Technical and Financial Report (Year 3) 2008 submitted to EU.
  31. Muhammad Abid, Development of computational mechanics infrastructure and human resources for advancing engineering design practices in Pakistani industry. Annual Report Technical and Financial (Year-3) 2008 submitted to HEC and USAID.
  32. Muhammad Abid, Development of Computational Mechanics Infrastructure and Human Resources for Advancing Engineering Design Practices in Pakistani Industry. August 2008, Islamabad, Pakistan.
  33. Muhammad Abid, Development of Computational Mechanics Infrastructure and Human Resources for Advancing Engineering Design Practices in Pakistani Industry. International conference on Pakistan-US Science and Technology, June 2009, USAID and UIUC USA.
  34. Muhammad Abid, Development of Computational Mechanics Infrastructure and Human Resources for Advancing Engineering Design Practices in Pakistani Industry. International conference on Pakistan-US Science and Technology, July 2009, HEC Pakistan.
  35. Muhammad Abid, Design, Fabrication, installation on 4-5 kW PV Solar System. (Report #: R&D/F-GIK/ENGG (102)/SA-08/01/P1) March 2009.
  36. Muhammad Abid, Design, Fabrication, installation on 4-5 kW PV Solar System. (Report #: R&D/F-GIK/ENGG (102)/SA-08/01/P2) July 2009.
  37. Muhammad Abid, Development of Computational Mechanics Infrastructure and Human Resources for Advancing Engineering Design Practices in Pakistani Industry. International conference on Pakistan-US Science and Technology, November 2009, HEC Pakistan.
  38. Muhammad Abid, Design, Fabrication, installation on 4-5 kW PV Solar System. (Report #: R&D/F-GIK/ENGG (102)/SA-08/01/P2) Dec 2009.
  39. Muhammad Abid, Development of Computational Mechanics Infrastructure and Human Resources for Advancing Engineering Design Practices in Pakistani Industry. International conference on Pakistan-US Science and Technology, June 2010, HEC Pakistan.
  40. Muhammad Abid, Khasan S Karimov. Design, Fabrication and Installation of Battery Based Micro Hydro Power Plant on Current Water Stream. PSF/Res/F-GIK/ENGG (107). Report 1. 2012
  41. Muhammad Abid, Khasan S Karimov. Design, Fabrication and Installation of Battery Based Micro Hydro Power Plant on Current Water Stream. PSF/Res/F-GIK/ENGG (107). Report II. 2012
  42. Muhammad Abid, Khasan S Karimov. Design, Fabrication and Installation of Battery Based Micro Hydro Power Plant on Current Water Stream. PSF/Res/F-GIK/ENGG (107). Report III. 2013
  43. Muhammad Abid, Khasan S Karimov. Design, Fabrication and Installation of Battery Based Micro Hydro Power Plant on Current Water Stream. PSF/Res/F-GIK/ENGG (107). Report IV. 2013


D. PATENTS

Dr. Shoaib Naseem

 

  1. GEL FUEL INJECTION TEST SYSTEM (젤화 연료 분사 시험 시스템 ); Application Date/ Number 2017-07-14 / 10-2017-0089593
  2. HIGH PRECISION DESIGN FOR GEL FUEL INJECTION SYSTEM (젤화 연료 분사 시험 시스템 ); Application Date/ Number; 2017-06-08 / 10-2017-0071760
  3. AUTOIGNITION GREEN BI-PROPELLANT TECHNOLOGY FOR AEROSPACE APPLICATION (항공우주용 친환경 자동점화성 이원추진제 기술 ); Document submitted to patent office (status; inprogress)