Faculty Proflle

Biography:

JUNAID IKRAM received the B.E. degree in electrical engineering from the University of Engineering and Technology Lahore, Pakistan, in 2005, the M.S. degree from Hanyang University, South Korea, in 2009, and the Ph.D. degree in electrical engineering from COMSATS University Islamabad, Pakistan, in 2017. He is currently working as an Associate Professor in COMSATS University Islamabad. His research interests include design, analysis, and optimization of PM axial flux machines, brushlees wound rotor vernier machines, brushless wound rotor synchronous machine, hybrid flux switching machines, and modeling of the machine losses, single and three phase inverters.

Educational Information

Year	Degree	Board / University

2010	MS	Hanyang University Korea
2017	PhD	COMSATS University Islamabad
2005	BSc Electrical Engineering	UET Lahore

Academic Experience

From	To	Post Held	Organization

No records to display.

Publications

Key Publications

SY HammadJ Ikram,J Ikram,''Performance analysis of brushless wound rotor Vernier machine by utilizing third harmonic field excitation'',IEEE Access,2023.
M Nazir,J Ikram,''Investigation of sinusoidal shaped rotor to reduce torque ripple in axial flux permanent magnet machine'',International Journal of Ambient Energy,2022.
MR Zakir,J Ikram,''Performance Improvement of Axial Flux Permanent Magnet Machine with Phase Group Concentrated Coil Winding'',Energies ,2022.
S Tariq,J Ikram,''Design and Analysis of Single Inverter-Fed Brushless Wound Rotor Vernier Machine'',IEEE Access,2022.
SSH Bukhari,Novel Self-Excited Brush-Less Wound Field Vernier Machine Topology,''Novel Self-Excited Brush-Less Wound Field Vernier Machine Topology'',IEEE Access,2022.
Z Mahmood,J Ikram,''Minimization of Torque Ripples in Multi-Stack Slotted Stator Axial-Flux Synchronous Machine by Modifying Magnet Shape'',Mathematics,2022.
Muhammad Yousaf,Junaid Ikram,''Reduction of Torque Ripples in Multi-Stack Slotless Axial Flux Machine by Using Right Angled Trapezoidal Permanent Magnet'',IEEE Access,2021.
S Ali,J Ikram,''Reduction of cogging torque in afpm machine using elliptical-trapezoidal-shaped permanent magnet'',The Applied Computational Electromagnetics Society Journal ,2021.
I Ahmad,J Ikram,''Performance improvement of multi-rotor axial flux vernier permanent magnet machine by permanent magnet shaping'',IEEE Access,2021.
H Usman,J Ikram,''Analysis and optimization of axial flux permanent magnet machine for cogging torque reduction'',Mathematics,2021.
M Bilal,J Ikram,''Performance improvement of dual stator axial flux spoke type permanent magnet vernier machine'',IEEE Access,2021.
MA Baig,J Ikram,''Minimization of cogging torque in axial field flux switching machine using arc shaped triangular magnets'',IEEE Access,2020.
J Ikram,,''Analysis and optimization of the axial flux permanent magnet synchronous generator using an analytical method'',Journal of Magnetics ,2017.
J Ikram,,''Reduction of torque ripple in an axial flux generator using arc shaped trapezoidal magnets in an asymmetric overhang configuration'',Journal of Magnetics ,2016.
J Ikram,,''Improved Model of the Iron Loss for the Permanent Magnet Synchronous Motors '',Journal of International Conference on Electrical Machines and Systems,2012.
J Ikram,,''Improved Model of the Iron Loss for the Permanent Magnet Synchronous Motors '',Journal of International Conference on Electrical Machines and Systems,2012.

Conferences

Year	Level	Country	City	Conference

No records to display.

Awards

Year	Awarding Organization	Description

No records to display.

Memberships

From	To	Title	Organization

No records to display.

Courses Taught

Type	Title	University

Under Graduate	Electric Machines	CUI
Under Graduate	Power Distribution	CUI
Under Graduate	Power Trasnmission	CUI
Under Graduate	Power System Analysis	CUI
Under Graduate	Advance Power System analysis	CUI
Under Graduate	Advance Power System Protection	CUI
Graduate	Advance Power System analysis	CUI
Graduate	Advance Power System Protection	CUI

Supervisions

Title	From	To	Organization / Institute	Type

No records to display.

Services

From	To	Institute / Organization	Job Specification

No records to display.

Books

Title	Subject	First Author	Second Author	Third Author	Year	Publisher

No records to display.

Fundings

From	To	Type	Title	Source	Amount

No records to display.

Active Collaborations

From	To	Type	Country	Organization

No records to display.

Industrial / Consulting Experience

From	To	Post Held	Organization

No records to display.

Extracurricular Activities

Hobbies	Interests

No records to display.

Languages and Skills

Languages	Skills

No records to display.

Disclaimer: The information displayed on this page belong to the author. Our employees are obliged not to display any false information. Therefore, CU will not take any liability for any false information included in this page. In case of any damages or other liabilites arising, employees are fully responsible for the content of their profiles.

Publication Year	Key Publications

1 2023	1 SY HammadJ Ikram,J Ikram,''Performance analysis of brushless wound rotor Vernier machine by utilizing third harmonic field excitation'',IEEE Access,2023.
2 2022	2 M Nazir,J Ikram,''Investigation of sinusoidal shaped rotor to reduce torque ripple in axial flux permanent magnet machine'',International Journal of Ambient Energy,2022.
3 2022	3 MR Zakir,J Ikram,''Performance Improvement of Axial Flux Permanent Magnet Machine with Phase Group Concentrated Coil Winding'',Energies ,2022.
4 2022	4 S Tariq,J Ikram,''Design and Analysis of Single Inverter-Fed Brushless Wound Rotor Vernier Machine'',IEEE Access,2022.
5 2022	5 SSH Bukhari,Novel Self-Excited Brush-Less Wound Field Vernier Machine Topology,''Novel Self-Excited Brush-Less Wound Field Vernier Machine Topology'',IEEE Access,2022.
6 2022	6 Z Mahmood,J Ikram,''Minimization of Torque Ripples in Multi-Stack Slotted Stator Axial-Flux Synchronous Machine by Modifying Magnet Shape'',Mathematics,2022.
7 2021	7 Muhammad Yousaf,Junaid Ikram,''Reduction of Torque Ripples in Multi-Stack Slotless Axial Flux Machine by Using Right Angled Trapezoidal Permanent Magnet'',IEEE Access,2021.
8 2021	8 S Ali,J Ikram,''Reduction of cogging torque in afpm machine using elliptical-trapezoidal-shaped permanent magnet'',The Applied Computational Electromagnetics Society Journal ,2021.
9 2021	9 I Ahmad,J Ikram,''Performance improvement of multi-rotor axial flux vernier permanent magnet machine by permanent magnet shaping'',IEEE Access,2021.
10 2021	10 H Usman,J Ikram,''Analysis and optimization of axial flux permanent magnet machine for cogging torque reduction'',Mathematics,2021.
11 2021	11 M Bilal,J Ikram,''Performance improvement of dual stator axial flux spoke type permanent magnet vernier machine'',IEEE Access,2021.
12 2020	12 MA Baig,J Ikram,''Minimization of cogging torque in axial field flux switching machine using arc shaped triangular magnets'',IEEE Access,2020.
13 2017	13 J Ikram,,''Analysis and optimization of the axial flux permanent magnet synchronous generator using an analytical method'',Journal of Magnetics ,2017.
14 2016	14 J Ikram,,''Reduction of torque ripple in an axial flux generator using arc shaped trapezoidal magnets in an asymmetric overhang configuration'',Journal of Magnetics ,2016.
15 2012	15 J Ikram,,''Improved Model of the Iron Loss for the Permanent Magnet Synchronous Motors '',Journal of International Conference on Electrical Machines and Systems,2012.
16 2012	16 J Ikram,,''Improved Model of the Iron Loss for the Permanent Magnet Synchronous Motors '',Journal of International Conference on Electrical Machines and Systems,2012.

Dr. Junaid Ikram

Associate Professor of Electrical and Computer Engineering, CUI Islamabad Campus